SuperPro TRC6740E Fixed Offset Upper Control Arm Set for 2022-2026 Toyota Tundra and 2023-2026 Toyota Sequoia

Fixed Offset Arms fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement SuperPro's fixed offset UCA set brings front end alignment and suspension geometry back into an ideal spec for Tundra's and Sequoias lifted 2" to 4" over stock. Measured at a 3" lift from stock the SuperPro TRC6740E kit delivers -1.0 camber and +2.0 caster when paired with the OEM lower control arm. Utilizing maintenance free SuperPro bushings and a uprated high-articulation ball joint the SuperPro UCAs are built to perform and offer superior durability on your favorite trail and superior road manners and on-road handling on the road trip to get there or on your daily commute. Designed and developed in Australia incorporating nearly 5 decades of SuperPro's industry-leading suspension expertise.

Improve front-end alignment and suspension geometry on lifted Toyota trucks and SUVs with the SuperPro TRC6740E Fixed Offset Upper Control Arm Set. Designed for vehicles lifted approximately 2 to 4 inches over stock, this UCA set helps restore alignment to a more suitable range while supporting improved suspension performance. When measured at a 3-inch lift and paired with the OEM lower control arm, the kit delivers approximately -1.0 degree of camber and +2.0 degrees of caster. Actual alignment results may vary based on vehicle configuration, lift components, and installation settings.
The TRC6740E set features fixed-offset arms fitted with uprated ball joints and SuperPro bushings to help reduce unwanted arm movement. The high-articulation ball joints support increased suspension travel and articulation, making the arms well suited for lifted applications and demanding trail use. Maintenance-free SuperPro bushings eliminate routine lubrication requirements while providing durable operation and consistent suspension control.
Built to deliver dependable performance both on and off the road, SuperPro upper control arms help enhance handling, steering response, and overall suspension behavior. The durable design supports confident trail driving, improved road manners, and comfortable daily commuting. The arms were designed and developed in Australia, drawing on nearly five decades of SuperPro suspension engineering experience.
This SuperPro TRC6740E upper control arm set is designed for select 2022-2026 Toyota Tundra applications and 2023-2026 Toyota Sequoia applications. Verify vehicle fitment, suspension lift height, and compatibility with other aftermarket components before installation. Professional installation and a complete alignment are recommended after fitting.

Features:

• Fixed-offset upper control arm set designed for lifted Toyota Tundra and Sequoia models

• Supports vehicles lifted approximately 2 to 4 inches over stock

• Delivers approximately -1.0 degree camber and +2.0 degrees caster at a 3-inch lift with the OEM lower control arm

• Uprated high-articulation ball joints support increased suspension travel

• Maintenance-free SuperPro bushings help reduce arm movement and routine service requirements

• Designed for improved alignment, handling, steering response, and suspension control

• Suitable for trail use, road trips, and daily driving

• Designed and developed in Australia by SuperPro

Compatible With
2022 Toyota Tundra
2023 Toyota Sequoia
2023 Toyota Tundra
2024 Toyota Sequoia
2024 Toyota Tundra
2025 Toyota Sequoia
2025 Toyota Tundra
2026 Toyota Sequoia
2026 Toyota Tundra