Old Man Emu MT64996013 MT64 Front Coilover Assembly for 2025–2026 Toyota 4Runner

Experience unmatched ride quality and control with the MT64 coilover assembly, engineered to handle every challenge. From demanding overlanding trips to the daily commute and every custom build in between, the MT64's huge 2.8in aluminum body and vehicle-specific damping ensure optimal performance across any terrain. This MT64 comes out of the box as an preassembled coilover, meaning its ready for install straight onto your vehicle. Set from factory to achieve 3in of lift on an stock weight vehicle, you also have the option to adjust the lift between 1.75-3in, using the included snap ring grooves. MT64 gives you the flexibility required to configure your ride to your specific needs. For the driver who demands a smooth, comfortable ride, day after day, in any terrain, MT64 is an clear choice.

• Designed with a hydraulic end zone top out, providing an added padding at the shock’s full extension, to help compensate for any unexpected bumps
• Complete coilover assembly allows for direct bolt in fitment, and providing 3in of lift on vehicles with stock to 220lbs of front end weight
• Aerospace grade aluminum body dissipates heat fifteen times faster than steel, and increases protection against stone damage
• Adjustable 6-position snap ring allows for a range of lifts from 1.75-3in giving you control of your build
• Digressive valving instantly reacts to changing surface conditions to maximize performance
• Monotube design with a massive 2.8in body allowing for more oil and accurate shock tuning
• Forged body cap and rod ends reduce weight while maintaining strength
• Direct replacement for stock and aftermarket lift kit

Upgrade the front suspension of your 2025–2026 Toyota 4Runner with the Old Man Emu MT64996013 MT64 coilover assembly. Designed for demanding overlanding, off-road driving, daily commuting, and custom builds, this vehicle-specific suspension component combines controlled handling with a smooth, comfortable ride across changing terrain. The preassembled coilover is ready for direct installation and is factory configured to provide approximately 3 inches of front lift on vehicles with stock front-end weight up to 220 pounds.
The Old Man Emu MT64 provides adjustable ride-height flexibility through its six-position snap-ring system, allowing the lift to be configured from approximately 1.75 to 3 inches. This adjustment range helps accommodate different vehicle setups and build requirements without sacrificing the balanced performance expected from a properly tuned suspension system. The complete coilover design serves as a direct replacement for stock suspension or compatible aftermarket lift kit components.
Built around a large 2.8-inch monotube body, the MT64 holds more oil for consistent damping and precise shock tuning. Its aerospace-grade aluminum construction dissipates heat faster than steel while helping protect the shock from stone damage. Digressive valving reacts quickly to changing surface conditions, while the hydraulic end-zone top-out system adds cushioning at full extension to help manage unexpected bumps. Forged body caps and rod ends reduce weight while maintaining the strength required for off-road use. Professional installation and an alignment are recommended after installation.

Features:

• Hydraulic end-zone top-out system adds cushioning at full shock extension

• Complete preassembled coilover provides direct bolt-in installation

• Provides approximately 3 inches of lift on vehicles with stock to 220-pound front-end weight

• Six-position snap-ring adjustment allows approximately 1.75 to 3 inches of lift

• Digressive valving responds quickly to changing terrain and surface conditions

• Monotube design with a large 2.8-inch body provides increased oil capacity and precise damping control

• Aerospace-grade aluminum body improves heat dissipation and protection from stone damage

• Forged body cap and rod ends reduce weight while maintaining strength

• Direct replacement for stock suspension and compatible aftermarket lift kit applications

• Fits 2025–2026 Toyota 4Runner applications

Compatible With
2025 Toyota 4Runner
2026 Toyota 4Runner