Mishimoto MMINT-TAC-24KBKRD Performance Intercooler and Charge Pipe Kit for 2024+ Toyota Tacoma and Land Cruiser

The 2024+ Tacoma's T24A-FTS builds heat soak under repeated load - the factory tube-and-fin intercooler loses cooling capacity across consecutive WOT runs, towing grades, and sustained trail use. The Mishimoto Intercooler and Charge Pipe Kit addresses the full charge air system in one purchase: a 55% larger bar-and-plate core paired with aluminum charge piping, DuraCore™ couplers, and constant-tension clamps, matched from intercooler to throttle body.--The bar-and-plate core cuts intake air temps by up to 36°F at wide-open throttle and delivers 30% lower pressure drop than stock, reducing turbocharger strain and maintaining boost efficiency under load. An included custom shroud directs full airflow to every row of the oversized core - no trimming required. Cast end tanks, billet aluminum ORB ports, updated mounting bushings, and an included crush washer complete the hardware package for a sealed, long-term install.--The system preserves Toyota's adaptive cruise control with no sensor relocation. Fits the 2024+ Toyota Tacoma (T24A-FTS, N400) and 2024+ Toyota Land Cruiser LC250. Available in Silver or Stealth Black intercooler finish with matching Wrinkle Black or Wrinkle Red charge pipes. Compatible with OEM and Mishimoto components for future cooling system expansion. Backed by the Mishimoto Lifetime Warranty. Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.

• Cuts charge air temps by up to 36°F at wide-open throttle — a 55% larger bar-and-plate core provides the heat-sink capacity the factory tube-and-fin unit loses under repeated WOT pulls, towing grades, and sustained off-road operation.
• Included custom shroud ensures full airflow reaches every row of the oversized core — no trimming, no gaps, and no performance loss from an undirected core face that would otherwise undercut the 55% volume increase.
• Reduces turbocharger stress with 30% lower pressure drop than OEM — optimized airflow through the 3.50-in thick core maintains boost pressure and consistent power across the RPM range under sustained demand.

The Mishimoto MMINT-TAC-24KBKRD Performance Intercooler and Charge Pipe Kit is engineered for the 2024 and newer Toyota Tacoma and Toyota Land Cruiser LC250 equipped with the T24A-FTS engine. Designed to address heat soak during repeated wide-open-throttle runs, towing, steep grades, and sustained off-road use, this complete system combines a high-capacity bar-and-plate intercooler with aluminum charge piping for improved charge-air cooling, airflow, and boost efficiency.
The intercooler core is 55% larger than the factory unit and can reduce intake air temperatures by up to 36°F at wide-open throttle. Optimized internal airflow provides a 30% lower pressure drop than the original equipment intercooler, helping reduce turbocharger strain while maintaining consistent performance under load. A custom shroud directs airflow across the entire core for effective cooling without trimming or modification. Cast end tanks, billet aluminum ORB ports, updated mounting bushings, DuraCore™ couplers, constant-tension clamps, and a crush washer are included for a secure, sealed installation.
The Mishimoto kit is designed to preserve the factory adaptive cruise control system without sensor relocation and is compatible with OEM and Mishimoto components for future cooling-system upgrades. The kit includes a Silver intercooler finish with matching Wrinkle Red charge pipes and is backed by the Mishimoto Lifetime Warranty. Professional installation is recommended. This product is not CARB approved and may not be legal for use on pollution-controlled vehicles in all applications.

Features:

• 55% larger bar-and-plate intercooler core increases heat-sinking capacity for repeated wide-open-throttle runs, towing, and trail use

• Reduces intake air temperatures by up to 36°F at wide-open throttle

• Provides 30% lower pressure drop than the factory intercooler to support efficient boost delivery and reduce turbocharger strain

• Custom airflow shroud directs cooling air across the complete intercooler core without trimming or modification

• Aluminum charge piping matches the intercooler to the throttle body for improved charge-air flow

• DuraCore™ couplers and constant-tension clamps support a secure, leak-resistant connection

• Cast end tanks, billet aluminum ORB ports, updated mounting bushings, and crush washer included

• Maintains factory adaptive cruise control functionality without relocating sensors

• Compatible with OEM and Mishimoto components for future cooling-system expansion

• Fits 2024 and newer Toyota Tacoma with T24A-FTS engine and 2024 and newer Toyota Land Cruiser LC250

• Silver intercooler finish with Wrinkle Red charge pipes

• Backed by the Mishimoto Lifetime Warranty

Compatible With
2024 Toyota Land Cruiser
2024 Toyota Tacoma
2025 Toyota Land Cruiser
2025 Toyota Tacoma
2026 Toyota Land Cruiser
2026 Toyota Tacoma