Mishimoto MMINT-TAC-24KBKBK Performance Intercooler and Charge Pipe Kit for 2024+ Toyota Tacoma and Land Cruiser

The 2024+ Tacoma's T24A-FTS builds heat soak under repeated load - the factory tube-and-fin intercooler loses cooling capacity across consecutive WOT runs, towing grades, and sustained trail use. The Mishimoto Intercooler and Charge Pipe Kit addresses the full charge air system in one purchase: a 55% larger bar-and-plate core paired with aluminum charge piping, DuraCore™ couplers, and constant-tension clamps, matched from intercooler to throttle body.--The bar-and-plate core cuts intake air temps by up to 36°F at wide-open throttle and delivers 30% lower pressure drop than stock, reducing turbocharger strain and maintaining boost efficiency under load. An included custom shroud directs full airflow to every row of the oversized core - no trimming required. Cast end tanks, billet aluminum ORB ports, updated mounting bushings, and an included crush washer complete the hardware package for a sealed, long-term install.--The system preserves Toyota's adaptive cruise control with no sensor relocation. Fits the 2024+ Toyota Tacoma (T24A-FTS, N400) and 2024+ Toyota Land Cruiser LC250. Available in Silver or Stealth Black intercooler finish with matching Wrinkle Black or Wrinkle Red charge pipes. Compatible with OEM and Mishimoto components for future cooling system expansion. Backed by the Mishimoto Lifetime Warranty. Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.

• Cuts charge air temps by up to 36°F at wide-open throttle — a 55% larger bar-and-plate core provides the heat-sink capacity the factory tube-and-fin unit loses under repeated WOT pulls, towing grades, and sustained off-road operation.
• Included custom shroud ensures full airflow reaches every row of the oversized core — no trimming, no gaps, and no performance loss from an undirected core face that would otherwise undercut the 55% volume increase.
• Reduces turbocharger stress with 30% lower pressure drop than OEM — optimized airflow through the 3.50-in thick core maintains boost pressure and consistent power across the RPM range under sustained demand.

The Mishimoto MMINT-TAC-24KBKBK Performance Intercooler and Charge Pipe Kit is engineered for the 2024 and newer Toyota Tacoma and Toyota Land Cruiser LC250 equipped with the T24A-FTS engine. Designed to address heat soak during repeated wide-open-throttle runs, towing, steep grades, and sustained off-road driving, this complete system combines a high-capacity bar-and-plate intercooler with aluminum charge piping, DuraCore™ couplers, and constant-tension clamps for reliable charge-air management from the intercooler to the throttle body.
The intercooler's 55% larger core helps reduce intake air temperatures by up to 36°F at wide-open throttle while providing a 30% lower pressure drop than the factory intercooler. Improved airflow helps reduce turbocharger strain, maintain boost efficiency, and support consistent power and throttle response under demanding conditions. A custom air shroud directs airflow across the full core surface without trimming or modification, while cast end tanks and billet aluminum ORB ports provide durable construction for long-term performance.
This Mishimoto kit includes updated mounting bushings, a crush washer, matched charge pipes, premium couplers, and constant-tension clamps for a secure installation. The system is designed to retain Toyota's adaptive cruise control without relocating sensors and is compatible with both OEM and Mishimoto components for future cooling-system upgrades. Finished with a Silver intercooler and Wrinkle Black charge pipes, the kit is backed by the Mishimoto Lifetime Warranty.

Features:

• Core Capacity: 55% larger bar-and-plate intercooler core increases heat-sink capacity for repeated high-load operation

• Temperature Reduction: Lowers intake air temperatures by up to 36°F at wide-open throttle

• Pressure Drop: Provides 30% lower pressure drop than the factory intercooler to support boost efficiency and reduce turbocharger strain

• Airflow Management: Custom shroud directs airflow across every row of the intercooler core without trimming or gaps

• Charge Piping: Includes durable aluminum charge pipes matched from the intercooler to the throttle body

• Construction: Features cast end tanks, billet aluminum ORB ports, updated mounting bushings, and a supplied crush washer

• Installation: Includes DuraCore™ couplers and constant-tension clamps for a secure, sealed connection

• Vehicle Compatibility: Fits 2024 and newer Toyota Tacoma models with the T24A-FTS engine and 2024 and newer Toyota Land Cruiser LC250 models

• Safety Systems: Retains adaptive cruise control without requiring sensor relocation

• Warranty: Backed by the Mishimoto Lifetime Warranty

Compatible With
2024 Toyota Land Cruiser
2024 Toyota Tacoma
2025 Toyota Land Cruiser
2025 Toyota Tacoma
2026 Toyota Land Cruiser
2026 Toyota Tacoma