Mishimoto MMAI-JLH-18SDW Performance Air Intake with Dry Filter for 2018-2023 Jeep Wrangler JL 2.0L Turbo

Your turbocharged 2.0L JL Wrangler was built to pull in a massive amount of air, cram it into the engine, mix it with fuel, and make power. But the turbocharger can only push out as much air as it can pull in. In order for the turbocharger to perform at peak efficiency, the intake also needs to flow as much as possible. That's where the Mishimoto 2018-2023 Jeep Wrangler JL 2.0L Performance Intake comes in.Our intake utilizes a precision-engineered rotational-molded tube with dyno-tested resonators and a custom filter to let your 2.0L Hurricane's turbo breathe easy. The smoother intake tube and large filter allow the Mishimoto intake to flow up to 39-percent better than the stock intake. That extra flow lets your turbo pull in more air and, combined with tuning, means more power. We painstakingly designed and tested the integrated resonator to keep the power in the most useful RPM range. Our intake retains the stock lower airbox and mounting points for easy installation while the CNC-machined EVAP venturi ensures CEL-free running.The Mishimoto 2018-2023 Jeep Wrangler JL 2.0L Performance Intake is available with an oiled or dry washable filter for maximum flow in any environment. Like all of our Jeep Wrangler products, this performance intake is backed by our Mishimoto Lifetime Warranty for a lifetime of easy breathing. Performance cold air intake kit engineered to increase airflow for improved horsepower and throttle response. Includes high-quality components for enhanced filtration, efficient airflow, and a precise fit.

• Precision-engineered and rotational-molded design
• Direct-fit for 2018-2023 Jeep Wrangler JL 2.0L
• Installs in about 1 hour

The Mishimoto MMAI-JLH-18SDW Performance Air Intake is engineered for the 2018-2023 Jeep Wrangler JL equipped with the 2.0L Hurricane turbocharged engine. By improving the path from the airbox to the turbocharger, this direct-fit intake helps the engine draw in more air for enhanced airflow, throttle response, and power potential when paired with appropriate tuning. The smoother intake tube, large washable filter, and integrated resonators work together to support efficient airflow while maintaining useful power across the RPM range.
This Mishimoto intake uses a precision-engineered rotational-molded tube designed for consistent internal flow and long-term durability. Dyno testing showed airflow improvements of up to 39 percent over the stock intake, helping the turbocharger breathe more freely. The integrated resonator is carefully tuned to support practical engine performance, while the CNC-machined EVAP venturi helps maintain proper emissions system operation and prevent check-engine-light issues. The kit retains the factory lower airbox and mounting points, providing a clean installation without unnecessary modifications.
The MMAI-JLH-18SDW includes a dry washable filter that delivers high-flow filtration and can be cleaned and reused. Installation takes approximately 1 hour using common tools and is designed for a precise fit on compatible Jeep Wrangler JL applications. This intake is EPA compliant and includes a CARB Executive Order designation of D-759-9. As with other Mishimoto Jeep Wrangler products, it is backed by the Mishimoto Lifetime Warranty for dependable performance and lasting value.

• Precision-engineered rotational-molded intake tube improves airflow to the turbocharger


• Flows up to 39 percent better than the stock intake when properly configured


• Dry washable filter provides reusable high-flow filtration


• Direct-fit application for 2018-2023 Jeep Wrangler JL 2.0L Turbo models


• Retains the factory lower airbox and mounting points


• Integrated resonators support useful power across the RPM range


• CNC-machined EVAP venturi helps support CEL-free operation


• Installs in approximately 1 hour


• EPA compliant with CARB EO D-759-9


• Covered by the Mishimoto Lifetime Warranty

Features:

• Precision-engineered rotational-molded intake tube

• Flows up to 39 percent better than the stock intake

• Dry washable filter for reusable high-flow filtration

• Direct-fit design for 2018-2023 Jeep Wrangler JL 2.0L Turbo models

• Retains the factory lower airbox and mounting points

• Integrated resonators tuned for useful RPM-range performance

• CNC-machined EVAP venturi supports CEL-free operation

• Installs in approximately 1 hour

• EPA compliant with CARB EO D-759-9

• Backed by the Mishimoto Lifetime Warranty

Compatible With
2018 Jeep Wrangler
2019 Jeep Wrangler
2020 Jeep Wrangler
2021 Jeep Wrangler
2022 Jeep Wrangler
2023 Jeep Wrangler