ICON K22103 Stage 3 2.5-Inch Suspension System for 2020+ Jeep Gladiator JT

The Stage 3 ICON 2.5” Suspension System for the Jeep Gladiator is the ideal setup for significantly improving on-road ride quality for the daily driven application that will see occasional moderate off-road use. This complete suspension system features 2.0 Aluminum Series shocks, 2.5” lift dual-rate front coil springs, a tubular steel fixed front lower link kit, billet front sway bar links, a triple-rate rear coil spring kit, a rear sway bar relocation kit, and all necessary hardware for install. This system provides an increase of over 30% front and 20% rear wheel travel and was designed around the use of a 35” tire. For those looking to run a 37” tire this can be achieved with the ICON Jeep JT Bump Stop Spacer Kit (Part #22071). 2020-UP JEEP GLADIATOR JT 2.5" STAGE 3 SUSPENSION SYSTEM TECH NOTE: ICON’s advertised lift heights are based around a typical Jeep JT build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher than advertised if installed on a stock weighted vehicle.

• “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
• Front lower links included for caster angle correction and improved front end articualtion
• Triple rate rear coil springs with ICON-engineered droop, ride, and overload rates
• Dual rate front coil springs with lifetime guarantee against sagging/breakage
• 2.0 Aluminum Series shocks with vehicle specific valving
• Fits 35" tires (37" with extended bump stop spacer kit)
• Improves on and off-road ride quality over stock
• Adjustable, billet aluminum front sway bar links
• 100% bolt-on system makes for an easy install
• 33% front, 23% rear increase in wheel travel
• 2.5" lift height

Upgrade your 2020 and newer Jeep Gladiator JT with the ICON K22103 Stage 3 2.5-inch Suspension System, engineered to improve ride quality, handling, wheel travel, and off-road capability. Designed for daily-driven Gladiators that see occasional moderate trail use, this complete suspension package combines vehicle-specific components and tuned performance for a balanced on-road and off-road driving experience. The system is designed around 35-inch tires and can accommodate 37-inch tires when paired with the ICON bump stop spacer kit, part number 22071.
The ICON K22103 system includes 2.0 Aluminum Series shocks with vehicle-specific valving, 2.5-inch lift dual-rate front coil springs, triple-rate rear coil springs, tubular steel fixed front lower links, adjustable billet aluminum front sway bar links, a rear sway bar relocation kit, and installation hardware. The front lower links help correct caster angle and improve front-end articulation, while the engineered coil spring rates support controlled movement, ride comfort, and load management. ICON front coil springs are backed by a lifetime guarantee against sagging or breakage.
Validated through ICON 1K testing under demanding off-road conditions, this suspension system is designed for strength, durability, and consistent performance. It provides approximately 33% more front wheel travel and 23% more rear wheel travel than stock, along with a 2.5-inch lift height. The 100% bolt-on design simplifies installation without requiring extensive modification. Actual lift height may vary depending on vehicle configuration and added accessories, such as a heavier front bumper or winch.

Features:

• ICON 1K tested under rigorous off-road conditions for verified tune, performance, strength, and durability

• 2.5-inch lift height for improved ground clearance and suspension capability

• 2.0 Aluminum Series shocks with vehicle-specific valving

• Dual-rate front coil springs with a lifetime guarantee against sagging or breakage

• Triple-rate rear coil springs engineered for controlled droop, ride quality, and overload support

• Tubular steel fixed front lower links for caster correction and improved front-end articulation

• Adjustable billet aluminum front sway bar links

• Rear sway bar relocation kit included

• Approximately 33% increase in front wheel travel and 23% increase in rear wheel travel

• Designed for 35-inch tires; supports 37-inch tires with ICON bump stop spacer kit part number 22071

• 100% bolt-on installation design

• Fits 2020 and newer Jeep Gladiator JT models

Compatible With
2020 Jeep Gladiator
2021 Jeep Gladiator
2022 Jeep Gladiator