ICON K22017 2.5-Inch Stage 7 Suspension System for 2018+ Jeep Wrangler JL

The ICON Vehicle Dynamics Stage 7 2.5" Suspension System for the 2018-UP Jeep Wrangler JL is designed for the driver looking to drastically improve the performance and ride quality of their vehicle. This Stage 7 system includes 2.5" lift dual rate coil springs, upgraded 2.5 Aluminum Series remote reservoir shocks with vehicle specific valving, tubular steel adjustable front upper links, fixed front lower links, fixed rear upper links, adjustable rear lower links, adjustable front and rear track bars, bump stop spacers, sway bar links, and all necessary hardware to complete the installation. With this combination of components, ICON was able to increase wheel travel numbers by over 30% (3" front, 2" rear), redefining the potential of the 2018-UP JL. The Stage 7 system allows for fitment of 35" tires when used with ICON's recommended wheel specifications. For users looking to install 37" tires, an optional bump stop spacer kit (PN: 22029) is available. 2018-UP JEEP JL 2.5" LIFT STAGE 7 SUSPENSION SYSTEM TECH NOTE: ICON’s advertised lift heights are based around a typical Jeep JL build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire. Lift heights may be higher than advertised if installed on a stock weighted vehicle.

• 2.5 Aluminum Series shocks feature one-piece impact extruded aluminum cylinders for excellent corrosion resistance and consistent finish
• Tubular steel link arms with dual durometer bushings for noise free performance, maximum articulation, and minimal bind
• “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
• Dual rate coil springs with lifetime guarantee against sagging/breakage
• Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
• Improves on and off-road ride quality over stock
• 100% bolt-on system makes for an easy install
• 3" front, 2" rear increase in wheel travel
• 2.5" lift height

Upgrade the capability, control, and ride quality of your 2018 and newer Jeep Wrangler JL with the ICON Vehicle Dynamics Stage 7 2.5-inch Suspension System, part number K22017. Designed for drivers who demand improved performance on and off the trail, this complete system combines vehicle-specific suspension components with tuned 2.5 Aluminum Series remote reservoir shocks. The result is increased wheel travel, enhanced suspension control, and a more capable driving experience compared with the factory setup.
The ICON K22017 system includes 2.5-inch lift dual-rate coil springs, front and rear adjustable track bars, tubular steel adjustable front upper links, fixed front lower links, fixed rear upper links, adjustable rear lower links, bump stop spacers, sway bar links, remote reservoir shocks, and required installation hardware. The shocks feature one-piece impact-extruded aluminum cylinders that provide excellent corrosion resistance, a consistent finish, and dependable performance under demanding conditions. Vehicle-specific valving helps balance on-road comfort with off-road control, while the dual-rate coil springs are backed by a lifetime guarantee against sagging or breakage.
Tubular steel link arms use dual-durometer bushings to support quiet operation, maximum articulation, and minimal suspension bind. ICON 1K testing validates the system’s tune, strength, durability, and performance in rigorous off-road conditions. The fully bolt-on design is engineered for a straightforward installation and increases wheel travel by approximately 3 inches in front and 2 inches in the rear. The system supports 35-inch tires when used with ICON’s recommended wheel specifications; 37-inch tires require the optional ICON bump stop spacer kit, part number 22029. Advertised lift height is based on a typical JL build with added accessory weight, so actual height may vary on a stock-weight vehicle.

Features:

• 2.5-inch lift height for 2018 and newer Jeep Wrangler JL models

• 2.5 Aluminum Series remote reservoir shocks with vehicle-specific valving

• One-piece impact-extruded aluminum shock cylinders for corrosion resistance and a consistent finish

• Dual-rate coil springs with a lifetime guarantee against sagging or breakage

• Tubular steel link arms with dual-durometer bushings for quiet operation and reduced bind

• Adjustable front and rear track bars for improved axle positioning

• Adjustable and fixed link arms configured for enhanced articulation and suspension control

• Approximately 3 inches of additional front wheel travel and 2 inches of additional rear wheel travel

• Supports 35-inch tires with ICON-recommended wheel specifications

• Compatible with 37-inch tires when paired with optional bump stop spacer kit PN 22029

• 100% bolt-on design for simplified installation

• ICON 1K tested for off-road tune, performance, strength, and durability

Compatible With
2018 Jeep Wrangler
2019 Jeep Wrangler
2020 Jeep Wrangler
2021 Jeep Wrangler
2022 Jeep Wrangler