ICON K22013 2.5-Inch Stage 3 Suspension System for 2018+ Jeep Wrangler JL

The ICON Vehicle Dynamics Stage 3 2.5" Suspension System for the 2018-UP Jeep Wrangler JL is designed for the driver looking to drastically improve the performance and ride quality of their vehicle. This Stage 3 system includes 2.5" lift dual rate coil springs, Vehicle Specific 2.0 Aluminum Series shocks, adjustable front upper links, tubular steel front lower links, adjustable front and rear track bars, bump stop spacers, sway bar links, and all necessary hardware to complete the installation. With this combination of components, ICON was able to increase wheel travel numbers by over 30% (3" front, 2" rear), redefining the potential of the 2018-UP JL. The front lower links included with this system are constructed from thick wall steel tubing, provide increased castor numbers, and feature dual durometer bushings for noise free operation, maximum articulation, and minimal bind. The Stage 3 system allows for fitment of 35" tires when used with ICON's recommended wheel specifications. For users looking to install 37" tires, an optional bump stop spacer kit (PN: 22029) is available. 2018-UP JEEP JL 2.5" LIFT STAGE 3 SUSPENSION SYSTEM TECH NOTE: ICON’s advertised lift heights are based around a typical Jeep JL build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire. Lift heights may be higher than advertised if installed on a stock weighted vehicle.

• Tubular steel link arms with dual durometer bushings for noise free performance, maximum articulation, and minimal bind
• “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
• Dual rate coil springs with lifetime guarantee against sagging/breakage
• Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
• 2.0 Aluminum Series shocks with vehicle specific valving
• Improves on and off-road ride quality over stock
• 100% bolt-on system makes for an easy install
• 3" front, 2" rear increase in wheel travel
• 2.5" lift height

The ICON Vehicle Dynamics K22013 Stage 3 Suspension System is engineered for the 2018 and newer Jeep Wrangler JL to deliver improved suspension performance, ride quality, articulation, and off-road capability. This complete 2.5-inch lift system includes dual-rate coil springs, vehicle-specific ICON 2.0 Aluminum Series shocks, adjustable front upper links, tubular steel front lower links, adjustable front and rear track bars, bump stop spacers, sway bar links, and the required installation hardware.
The system is designed to increase usable wheel travel by approximately 3 inches in the front and 2 inches in the rear while maintaining controlled on-road handling and capable off-road performance. Tubular steel link arms feature dual-durometer bushings to reduce noise, support maximum articulation, and minimize suspension bind. The dual-rate coil springs are backed by a lifetime guarantee against sagging or breakage, while the shocks use vehicle-specific valving developed for the Wrangler JL platform. ICON 1K testing validates the system’s tune, performance, strength, and durability under demanding off-road conditions.
The ICON K22013 is a 100% bolt-on system designed for a straightforward installation and supports fitment of 35-inch tires when used with ICON’s recommended wheel specifications. An optional ICON bump stop spacer kit, part number 22029, is available for applications using 37-inch tires. Actual lift height may vary depending on vehicle configuration and accessory weight; ICON’s advertised lift is based on a typical Wrangler JL equipped with additional components such as a heavier front bumper, winch, rear bumper, and spare tire.

Features:

• 2.5-inch lift height for 2018 and newer Jeep Wrangler JL models

• Dual-rate coil springs with a lifetime guarantee against sagging or breakage

• Vehicle-specific ICON 2.0 Aluminum Series shocks for controlled ride performance

• Tubular steel link arms with dual-durometer bushings for reduced noise, maximum articulation, and minimal bind

• Adjustable front upper links and adjustable front and rear track bars for suspension geometry control

• Increases wheel travel by approximately 3 inches in the front and 2 inches in the rear

• Supports 35-inch tires with ICON-recommended wheel specifications

• Compatible with 37-inch tires when paired with optional bump stop spacer kit 22029

• 100% bolt-on design for streamlined installation

• ICON 1K tested for off-road tune, performance, strength, and durability

Compatible With
2018 Jeep Wrangler
2019 Jeep Wrangler
2020 Jeep Wrangler
2021 Jeep Wrangler
2022 Jeep Wrangler