ICON 58796 2.5 Series VS Remote Reservoir Front Coilover Kit for 2025-2026 Toyota 4Runner 2WD

ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir front coilover shocks are an incredible upgrade for the front end of the 2025-2026 Toyota 4Runner. These adjustable coilovers allow up 1.25-3” of lift height adjustability, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific valving, their large 2.5” shock body with increased piston surface area over stock components, and their optimized extended length taylored specifically for 2WD models, yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. When paired with ICON 2.0 or 2.5 Aluminum Series rear shock absorbers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your 6th Gen Toyota 4Runner. ICON 2.5 Series front coilover shocks are an incredible upgrade for the 2025-2026 Toyota 4Runner. These adjustable coilovers allow up 1.25-3” of lift with vehicle-specific shock length and valving for superior ride quality and performance. APPLICATION NOTE #85: Advertised lift height ranges are for a stock equipped vehicle. Increasing weight of vehicle due to accessories will alter lift range.

• 2.5" diameter shock bodies with remote reservoirs offer increased heat capacity and improved cooling for consistent performance
• Vehicle specific tuned for superior shock damping, vehicle control, and improved ride quality over stock
• Vehicle specific shock length optimized for 2WD models yields maximum front wheel travel
• Height-adjustable coilovers offer 1.25-3" of lift height adjustment over stock
• Corrosion resistant CAD plated shock bodies with 7/8" diameter shafts
• FK rod end bearings for extended longevity and minimal deflection
• 6061 Aircraft grade aluminum CNC machined components
• Fully rebuildable and re-tunable
• ICON engineered coil springs

Upgrade the front suspension of your 2025-2026 Toyota 4Runner 2WD with the ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir front coilover kit, Part Number 58796. Designed for improved on-road comfort and off-road control, this height-adjustable coilover system provides 1.25-3 inches of lift adjustment over stock, helping accommodate larger and more aggressive wheel and tire combinations. Vehicle-specific valving and shock lengths are optimized for 2WD models to maximize usable front wheel travel while maintaining balanced suspension performance.
The 2.5-inch shock bodies use remote reservoirs to increase oil capacity and cooling surface area, helping manage heat buildup, resist cavitation, and reduce damper fade during demanding driving. ICON-engineered coil springs, vehicle-specific tuning, and increased piston surface area work together to deliver improved damping, ride quality, and vehicle control compared with stock components. For balanced front-to-rear performance, pair this kit with ICON 2.0 or 2.5 Aluminum Series rear shock absorbers.
Built for durability, the coilovers feature corrosion-resistant CAD-plated shock bodies, 7/8-inch shafts, FK rod end bearings, and CNC-machined 6061 aircraft-grade aluminum components. The system is fully rebuildable and re-tunable, supporting long-term serviceability and performance. Advertised lift adjustment is based on a stock-equipped vehicle; added weight from accessories may affect the achievable lift range. Professional installation and alignment are recommended after installation.
This ICON 58796 coilover kit is designed specifically for the front of 2025 and 2026 Toyota 4Runner 2WD models. Verify vehicle configuration and suspension requirements before ordering. This product contains a chemical known to the State of California to cause cancer or reproductive harm.

Features:

• 2.5-inch shock bodies with remote reservoirs increase heat capacity and improve cooling for consistent performance

• Vehicle-specific valving improves shock damping, vehicle control, and ride quality over stock

• Vehicle-specific shock length is optimized for 2WD models to maximize front wheel travel

• Height-adjustable coilovers provide 1.25-3 inches of lift adjustment over stock

• Corrosion-resistant CAD-plated shock bodies with 7/8-inch shafts

• FK rod end bearings provide extended longevity and minimal deflection

• CNC-machined 6061 aircraft-grade aluminum components

• Fully rebuildable and re-tunable design

• ICON-engineered coil springs

Compatible With
2025 Toyota 4Runner
2026 Toyota 4Runner