ICON 57826XP 2.5 Aluminum Series Rear Shocks with Remote Reservoir and CDXS for 2010-2014 Toyota Tacoma

ICON’s 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. With a truly vehicle-specific design, these shocks are configured specifically for each application in both length and damping tune. Featuring ICON exclusive rod ends with side mounted eyelets, these "RXT" shocks maximize the capabilities of the suspension platform by allowing for increased shaft travel compared to traditional shock absorbers while remaining fully bolt on into the vehicle's factory shock mounts. One-piece impact extruded aluminum cylinders offer lighter weight, improved corrosion resistance, and a more uniform finish than traditional plated steel cylinders. Like all ICON shock absorbers, these 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON’s unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal “Bump Zone” that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom-out conditions and controls the suspension effectively when compressing at high velocity. ICON's exclusive Compression Damping Dual Speed (CDXS) valves are included for precisely dialing in your suspension performance. CDXS controls fluid flow under compression, with independent adjustability of high speed and low speed compression force. 10 discreet detented settings for both low and high-speed adjustment knobs allow separate adjustments for handling response and overall aggressiveness. ICON 2.5 Aluminum Series shocks are designed for outstanding performance off-road and a smooth ride on the street. With vehicle-specific design, these shocks are configured specifically for each application in both length and damping tune. APPLICATION NOTE #244: ICON Multi-Rate Leaf Springs Part # 158505 required for installation

• ICON exclusive side mounted "RXT" rod ends allow for increased shaft travel and compatibility with vehicle's stock shock mounting points
• ICON CDXS equipped for independent adjustability of high speed and low speed compression force for handling response and aggressiveness
• One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
• ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
• One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
• Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
• Premium grade shock oil for consistent suspension damping along a wide temperature range
• PTFE lined spherical bearings and application specific mounting hardware
• 7/8” diameter induction hardened, chrome plated shock shafts
• Nitrogen charged monotube design with remote reservoir
• 6061 aircraft grade aluminum CNC machined components
• Double-sealed Schrader caps reduce risk of damage
• 100% Rebuildable and revalveable

Upgrade your 2010-2014 Toyota Tacoma with ICON Part Number 57826XP 2.5 Aluminum Series rear shock absorbers. Designed specifically for the Tacoma suspension platform, these vehicle-specific shocks combine tuned damping with increased shaft travel to deliver controlled off-road performance and a smooth, composed ride on the street. The included side-mounted RXT rod ends bolt into the vehicle’s factory shock mounting points while helping maximize available suspension travel. Installation requires ICON Multi-Rate Leaf Springs Part Number 158505.
Built for demanding use, each ICON 57826XP shock features a nitrogen-charged monotube design, remote reservoir, premium shock oil, and a one-piece digressive piston with application-specific valving. The remote reservoir improves heat dissipation to help reduce fade during prolonged off-road driving, while the internal Bump Zone increases damping by 20% as the shock approaches full compression. ICON’s CDXS technology provides independent high-speed and low-speed compression adjustment, with 10 detented settings for each adjustment range. This allows you to fine-tune handling response, ride control, and suspension aggressiveness for changing terrain and driving conditions.
The one-piece impact-extruded aluminum cylinders offer reduced weight, improved corrosion resistance, and a consistent finish. CNC-machined 6061 aircraft-grade aluminum components, PTFE-lined spherical bearings, application-specific mounting hardware, double-sealed Schrader caps, and 7/8-inch induction-hardened chrome-plated shafts support long-term durability. Like other ICON shock absorbers, the 2.5 Aluminum Series is fully rebuildable and revalveable, making it a serviceable performance upgrade for Tacoma owners who require reliable control both on and off the road. This product is sold as a pair and carries a California Proposition 65 warning.

Features:

• Vehicle-specific rear shock tuning for 2010-2014 Toyota Tacoma applications

• Side-mounted RXT rod ends increase shaft travel while retaining compatibility with factory shock mounts

• CDXS technology offers independent high-speed and low-speed compression adjustment

• Ten detented settings for both high-speed and low-speed compression adjustment

• Internal Bump Zone increases damping by 20% near full compression

• Remote reservoir improves heat dissipation and helps reduce shock fade

• One-piece digressive piston with application-specific valving for controlled on- and off-road performance

• Impact-extruded aluminum cylinders provide corrosion resistance and a consistent finish

• Nitrogen-charged monotube construction with premium-grade shock oil

• 7/8-inch induction-hardened, chrome-plated shock shafts

• PTFE-lined spherical bearings and application-specific mounting hardware

• CNC-machined 6061 aircraft-grade aluminum components

• Double-sealed Schrader caps help protect against damage

• 100% rebuildable and revalveable

• Installation requires ICON Multi-Rate Leaf Springs Part Number 158505

Compatible With
2005 Toyota Tacoma
2006 Toyota Tacoma
2007 Toyota Tacoma
2008 Toyota Tacoma
2009 Toyota Tacoma
2010 Toyota Tacoma
2011 Toyota Tacoma
2012 Toyota Tacoma
2013 Toyota Tacoma
2014 Toyota Tacoma
2015 Toyota Tacoma
2016 Toyota Tacoma
2017 Toyota Tacoma
2018 Toyota Tacoma
2019 Toyota Tacoma
2020 Toyota Tacoma
2021 Toyota Tacoma
2022 Toyota Tacoma
2023 Toyota Tacoma