ICON 57826EP V.S. 2.5 Aluminum Series Rear Shocks with CDEV for 2016-2017 Toyota Tacoma

ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks with CDEV are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. This RXT rear shock features a side-mount eyelet making it shorter in collapsed length, longer at extension, and still fit in the factory mounting location, allowing for additional wheel travel when paired with ICON Multi-Rate Leaf Springs. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks with CDEV are 100% rebuildable and 100% revalveable. ICON 2.5 Aluminum Series shocks with CDEV are designed to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. APPLICATION NOTE #198: An iOS operated device is required to run ICON Intelligent Control app

• ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
• ICON exclusive side mounted "RXT" rod ends allow for increased shaft travel and compatibility with vehicle's stock shock mounting points
• One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
• ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
• One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
• Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
• Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
• PTFE lined spherical bearings and application specific mounting hardware
• 7/8” diameter induction hardened, chrome plated shock shaft
• Nitrogen charged monotube design with piggyback reservoir
• 6061 aircraft grade aluminum CNC machined components
• 100% Revalveable
• 100% Rebuildable

ICON Vehicle Specific (V.S.) 2.5 Aluminum Series rear shocks with CDEV are engineered for the 2016-2017 Toyota Tacoma to deliver controlled off-road performance and a comfortable ride on the street. Each shock is application-tuned for proper damping and travel, helping optimize suspension response for the Tacoma platform. The RXT rear shock design uses a side-mounted eyelet to reduce collapsed length while increasing extension travel, allowing additional wheel travel when paired with ICON Multi-Rate Leaf Springs while retaining compatibility with the factory mounting location. This product is supplied as a pair and is identified by ICON part number 57826EP.

The CDE Valve technology enables in-vehicle adjustment of compression damping settings through the ICON Intelligent Control (IIC) app, including active adjustment capability. An iOS-operated device is required to run the ICON Intelligent Control app. ICON's exclusive internal Bump Zone increases damping by 20 percent near full compression to help control high-velocity suspension movement and reduce harsh bottom-out behavior. The nitrogen-charged monotube design with piggyback reservoir improves heat dissipation, helping maintain consistent damping during prolonged off-road use.

Each shock features a one-piece digressive piston with vehicle-specific valving, a hard-anodized impact-extruded aluminum cylinder, premium 5WT shock oil, and a 7/8-inch induction-hardened, chrome-plated shaft. PTFE-lined spherical bearings, application-specific mounting hardware, and CNC-machined 6061 aircraft-grade aluminum components support long-term durability. ICON V.S. 2.5 Aluminum Series shocks with CDEV are 100 percent rebuildable and 100 percent revalveable, allowing future service and tuning as vehicle use changes.

Features:

• CDE Valve technology provides in-vehicle compression damping adjustment and active control through the ICON Intelligent Control app

• RXT side-mounted rod ends increase shaft travel while maintaining compatibility with factory shock mounting points

• Vehicle-specific digressive piston and valving deliver controlled on-road comfort and off-road performance

• Internal Bump Zone increases damping by 20 percent near full compression for improved bottom-out control

• Hard-anodized, impact-extruded aluminum cylinders provide corrosion resistance and a consistent finish

• Premium 5WT shock oil supports consistent damping across a wide temperature range

• Piggyback reservoir design improves heat dissipation and helps reduce shock fade

• PTFE-lined spherical bearings and application-specific mounting hardware included

• 7/8-inch induction-hardened, chrome-plated shock shaft

• Nitrogen-charged monotube shock design with piggyback reservoir

• CNC-machined 6061 aircraft-grade aluminum components

• 100 percent rebuildable

• 100 percent revalveable

• Fits 2016-2017 Toyota Tacoma applications

Compatible With
2005 Toyota Tacoma
2006 Toyota Tacoma
2007 Toyota Tacoma
2008 Toyota Tacoma
2009 Toyota Tacoma
2010 Toyota Tacoma
2011 Toyota Tacoma
2012 Toyota Tacoma
2013 Toyota Tacoma
2014 Toyota Tacoma
2015 Toyota Tacoma
2016 Toyota Tacoma
2017 Toyota Tacoma
2018 Toyota Tacoma
2019 Toyota Tacoma
2020 Toyota Tacoma
2021 Toyota Tacoma
2022 Toyota Tacoma
2023 Toyota Tacoma