Camburg Toyota Tacoma 2005-2023 Long-Travel Spring-Under Mounts, Shackles and Hardware Kit CAM-320046

$1,299.99

Skip to product information
1 of 10

Regular price $1,299.99
Sale price $1,299.99 Regular price $1,299.99
Shipping calculated at checkout.
When we designed our spring-under kit for the 2005-2023 Toyota Tacoma’s we wanted to take the guess work out and make a kit that’s easier to install. We did this by designing the front and rear spring hangers to bolt to the frame using the existing holes used by the factory mounts that are riveted on. Our mounts are considerably stronger than weld-on versions and we incorporated tabbing on the rear mounts for a x-member or fuel cell cradle for even more strength. This race and BITD 7100 class championship winning kit has been used over the years on serious prerunners and race trucks in the deserts of California and as far as the Dakar rally. A limited travel variation of this kit was also used on the 2017 Tacoma we raced in the 2017 Mint 400 in the 7300 class. This suspension kit is for the serious builder/enthusiast and is intended to be used with a bed cage and 2.5-3.0 x 16-18? travel shocks through the bed along with FOX or King bump stops. Their is quite a bit of work involved with installing these parts and is not an entry level install. Leaf springs are not included. Camburg Toyota Tacoma Pre/4wd '05-23 Long Travel Spring-Under Kit (no leaf springs) Leaf springs are not included. Need further assistance? Call 1-714-848-8880.
  • Championship winning performance
  • Increases wheel travel
  • Race winning design

The Camburg CAM-320046 Long-Travel Spring-Under Kit is designed for 2005-2023 Toyota Tacoma PreRunner and 4WD builds seeking increased rear suspension travel and race-proven performance. This complete mounting, shackle, and hardware solution is engineered for serious off-road enthusiasts, desert prerunners, and competition trucks. Leaf springs are not included, allowing builders to select spring rates and configurations suited to their specific vehicle and intended use.
The front and rear spring hangers bolt to the Tacoma frame using the existing factory mounting holes, helping eliminate the guesswork associated with fabricating and positioning weld-on mounts. The bolt-on design provides a strong foundation while simplifying alignment during installation. Rear mount tabbing is incorporated to support the addition of a crossmember or fuel cell cradle, helping create a more rigid and capable chassis structure for demanding applications.
Developed from Camburg's race experience, this spring-under system has been used on serious prerunners and race trucks in desert competition, including championship-level BITD 7100 applications and Dakar Rally builds. The kit is intended for advanced installations using a bed cage, through-bed long-travel shocks, and compatible FOX or King bump stops. Significant vehicle preparation and fabrication may be required, so professional installation or advanced mechanical experience is recommended. This is not an entry-level suspension project. For application assistance, contact Camburg at 1-714-848-8880.


  • Championship-winning performance for demanding off-road and desert applications

  • Increases rear wheel travel when paired with the appropriate suspension components

  • Race-proven spring-under design for Toyota Tacoma prerunners and competition trucks

  • Front and rear hangers mount using existing factory frame holes

  • Rear mount tabs support crossmember or fuel cell cradle fabrication

  • Leaf springs are not included

Features:

  • Championship-winning performance for demanding off-road and desert applications
  • Increases rear wheel travel with compatible suspension components
  • Race-proven spring-under design for Toyota Tacoma prerunners and competition trucks
  • Bolt-on front and rear hangers use existing factory frame mounting holes
  • Rear mount tabs support crossmember or fuel cell cradle fabrication
  • Designed for advanced installations with a bed cage, long-travel shocks, and bump stops
  • Leaf springs are not included

Compatible With
2005 Toyota Tacoma
2006 Toyota Tacoma
2007 Toyota Tacoma
2008 Toyota Tacoma
2009 Toyota Tacoma
2010 Toyota Tacoma
2011 Toyota Tacoma
2012 Toyota Tacoma
2013 Toyota Tacoma
2014 Toyota Tacoma
2015 Toyota Tacoma
2016 Toyota Tacoma
2017 Toyota Tacoma
2018 Toyota Tacoma
2019 Toyota Tacoma
2020 Toyota Tacoma
2021 Toyota Tacoma
2022 Toyota Tacoma
2023 Toyota Tacoma



Camburg Toyota Tacoma 2005-2023 Long-Travel Spring-Under Mounts, Shackles and Hardware Kit CAM-320046

$1,299.99

Exclusive discounts, just for you. Sign up now.