Camburg CAM-310287 Performance Slapper Lower Arm Kit for 2024-2025 Toyota Tacoma

Our Camburg lower control arms take your Tacoma’s suspension to the next level. Being stock length, you’re able to use your existing coilovers and upper control arms with no need for aftermarket fenders. We’ve incorporated our optional Slapper bump stop system for additional bottom out control and damping. This allows for a plush ride through the small stuff that doesn’t bottom out easily through the bigger hits and G-outs. In stock width configurations, the Slapper bump stop system performs better than a secondary bypass shock and packages much easier. Designing these arms, we set them up for maximum useable wheel travel along with an optimized shock motion ratio. CAD/CAM engineered, the internally boxed construction is considerably stronger than the stock arms and were designed to maximize ground clearance and off-road performance. We include bolt-on aluminum skid plates for added protection. Our Camburg X-Joint XL is an extreme performance, all-weather, all conditions, high angle ball joint that is considerably stronger than anything on the market with its heat-treated 4340 construction. This allows for maximum wheel travel, lower maintenance, longer longevity and a lighter steering response compared to a uniball. We use FK 1? uniballs at the frame rather than cheap bushings that constantly bind and flex under braking. Uniballs allow for zero binding and have zero flex under braking, so your geometry and alignment is always consistent. The pivot spacers have better clamping force in the frame mounts due to the increased surface area which keeps the holes from wearing over time or the alignment cams coming loose and moving while in use. Ready to install with all the necessary hardware included, these are by far the strongest stock length aftermarket arms out on the market. Combine these with our upper control arms, Slapper bump stop system and aftermarket coilovers for the ultimate stock width setup. Camburg 2024-2025 Toyota Tacoma 2WD/4WD Performance Slapper Kit Given the multitude of factors such as wheel size, offset/backspacing, tire size, brand preferences, and suspension specifics, adjustments like trimming the plastic inner fenders or modifying the body mounts behind the front tires may be necessary to prevent tire rubbing.

• Superior design and components used for the ultimate strength
• Slapper bump stop system for additional bottom out control
• Designed for maximum wheel travel and articulation

Upgrade the front suspension of your 2024-2025 Toyota Tacoma with the Camburg CAM-310287 Performance Slapper Lower Arm Kit. Designed for 2WD and 4WD applications, these stock-length lower control arms work with your existing coilovers and upper control arms without requiring aftermarket fenders. The integrated Slapper bump stop system provides additional bottom-out control and damping, helping deliver a controlled, compliant ride over smaller impacts while improving performance through larger hits and deep suspension compression.

CAD/CAM-engineered and internally boxed, the arms provide greater strength than the factory components while maximizing usable wheel travel, articulation, ground clearance, and shock motion ratio. Bolt-on aluminum skid plates help protect the arms during off-road use. Camburg X-Joint XL high-angle ball joints use heat-treated 4340 construction for enhanced strength, durability, steering response, and all-weather performance. Unlike a uniball at the spindle, the X-Joint XL supports increased wheel travel with reduced maintenance requirements and extended service life.

At the frame mounts, FK uniballs replace flexible factory-style bushings to minimize binding and deflection during braking, helping maintain consistent suspension geometry and alignment. Pivot spacers increase clamping surface area at the frame mounts, reducing the likelihood of mount-hole wear or alignment-cam movement during demanding use. The kit includes the required installation hardware and is ready to install. For a complete stock-width setup, pair these lower arms with Camburg upper control arms, the Slapper bump stop system, and performance coilovers. Wheel size, offset, backspacing, tire size, and suspension configuration may affect clearance; trimming the plastic inner fenders or modifying body mounts behind the front tires may be necessary to prevent rubbing.

• Superior design and components used for increased strength
• Slapper bump stop system for additional bottom-out control
• Designed for maximum wheel travel and articulation

Features:

• Stock-length lower control arms work with existing coilovers and upper control arms

• Slapper bump stop system improves bottom-out control and suspension damping

• Internally boxed, CAD/CAM-engineered construction enhances strength and off-road durability

• Camburg X-Joint XL ball joints provide high-angle articulation and long service life

• FK frame-mount uniballs minimize binding and deflection under braking

• Bolt-on aluminum skid plates provide added protection

• Includes installation hardware for a ready-to-install suspension upgrade

• Fits 2024-2025 Toyota Tacoma 2WD and 4WD models

Compatible With
2024 Toyota Tacoma
2025 Toyota Tacoma