ARB Bar Jl T/Stubby

Inspired by the classic ARB Wrangler JK Stubby Bumper, the newly developed ARB Wrangler JL Stubby Bumper is designed for the off-roader who is in need of a winch mounting platform while maintaining maximum clearance for larger diameter tires. Generally vehicles that run larger than 37 inch tires may rub the wings of a traditional style ARB Deluxe Bumper. The Stubby Bumper eliminates this issue on the Jeep Wrangler JL as it is only a little wider than the vehicles chassis. For recovery situations each wing section features jacking points suitable for an ARB JACK or mechanical recovery jack. Antenna tabs on main tube can be used for fitment of communication antennas or driving lights to the bumper. Central on each outer wing section are 0.8 thick 350 grade recovery points which tie through the wings and into the chassis mounts directly giving the strongest possible recovery point. The winch platform will allow the mounting of most traditional low mount style Warn winches and narrow mount pattern competition type winches. A bracket is provided for those who wish to run their control box in the center of the bumper. Two front ?flip up style license plate mounts are provided. One to suit roller fairleads and one for the hawse type fairlead. These allow the number plate to be located over the fairlead and flipped up out of the way when the winch is in use. ARB Stubby Bumper; Integrit(TM) Textured Black Powder Coat Finish; Recovery Jack Points; Tow Points; Driving Light Mount; Incl. Fog Lights; Winch Install Kit;

• Provision To Accommodate A Range Of IPF And ARB Driving Lights
• Manufactured From 4 mm Laser Cut And Folded Steel Sheet
• Equally Suited To Winch And Non Winch Applications
• Durable Steel Construction For Maximum Protection
• All Hardware Zinc Plated For Corrosion Resistance
• All Exterior Surfaces Are CMT Pulse Welded
• 0.8 in. 350 Grade Steel Recovery Points
• Specific Design To Complement Vehicle
• ERW Center Frame Tube

The ARB 3450450 Wrangler JL Stubby Bumper is designed for off-roaders who need a strong winch mounting platform while preserving maximum front-end clearance for larger tires. Developed specifically for the 2018-2019 Jeep Wrangler JL, this bumper is narrower than a traditional full-width bumper, helping reduce tire interference during demanding trail use. Its stubby design provides a practical combination of vehicle protection, recovery capability, and improved approach clearance for modified Jeep applications.
The integrated winch platform accommodates most traditional low-mount Warn winches as well as narrow-mount competition-style winches. A control box bracket is included for center-bumper installation, while flip-up license plate mounts are provided for both roller and hawse fairlead configurations. When the winch is needed, the license plate can be moved out of the way for convenient access. Recovery points are engineered to tie through the bumper wings and into the chassis mounts, creating a strong foundation for vehicle recovery. Each wing also includes a jack point suitable for an ARB JACK or mechanical recovery jack.
Finished with ARB Integrit textured black powder coating, the bumper offers durable protection and a clean appearance that complements the Wrangler JL. Antenna tabs on the center tube can support communication antennas or selected driving light installations, and the bumper provides mounting provisions for a range of ARB and IPF lights. Its steel construction, folded and laser-cut components, corrosion-resistant hardware, and welded exterior surfaces are designed for reliable service in demanding environments. The bumper is equally suited to winch and non-winch applications and includes fog light provisions and a winch installation kit.

• Provision to accommodate a range of ARB and IPF driving lights
• Durable steel construction for enhanced front-end protection
• Integrated recovery and mechanical jack points
• Winch platform for low-mount and narrow-mount applications
• Flip-up license plate mounts for roller and hawse fairleads
• Integrit textured black powder coat finish

Features:

• Vehicle fitment: Designed for the 2018-2019 Jeep Wrangler JL

• Stubby bumper design: Preserves clearance for larger off-road tires

• Winch mounting platform: Supports traditional low-mount and narrow-mount competition winches

• Recovery points: Tie through the bumper wings and into the chassis mounts

• Jack points: Provide mounting locations for an ARB JACK or mechanical recovery jack

• Driving light provisions: Accommodates selected ARB and IPF lighting applications

• License plate mounts: Includes flip-up mounts for roller and hawse fairlead setups

• Construction: Durable steel design with welded exterior surfaces

• Finish: ARB Integrit textured black powder coating

• Included equipment: Fog light provisions and winch installation kit

Compatible With
2018 Jeep Wrangler
2019 Jeep Wrangler
2020 Jeep Gladiator
2020 Jeep Wrangler
2021 Jeep Gladiator
2021 Jeep Wrangler
2022 Jeep Gladiator
2022 Jeep Wrangler
2023 Jeep Gladiator
2023 Jeep Wrangler
2024 Jeep Gladiator
2024 Jeep Wrangler
2025 Jeep Gladiator
2025 Jeep Wrangler