{"product_id":"spc-performance-35480-adjustable-front-upper-control-arms-for-toyota-4runner-fj-cruiser-and-lexus-gx","title":"SPC Performance 35480 Adjustable Front Upper Control Arms for Toyota 4Runner, FJ Cruiser and Lexus GX","description":"Designed, engineered, tested, and assembled in Colorado, SPC Performance adjustable upper control arms are loaded with impressive features. Improve suspension travel, handling, and tire wear while centering the tire in the wheel well for maximum clearance needed for oversized tires. Now equipped with maintenance-free ball joints and free-pivoting xAxis™ sealed flex joints in bonded rubber sleeves, for correction of alignment angles and restoration of factory ride quality. A Forged steel design provides the strength and durability needed for the most demanding environments. SPC adjustable control arms have improved clearance to get around the sp ring bucket and a full 80° of articulation in the ball joint. When trucks are lifted, caster and camber angles are affected that can lead to poor handling characteristics such as ‘wandering’. SPC control arms have positive caster built-in for lifted vehicles to restore alignment angles and driv ability. The patented ball joint design allows the tire to be positioned correctly in the wheel well and additional adjustment in the OE lower arms can maximize placement for oversized tires to avoid fender trimming. If replacement lower adjustment cams are needed, see part #25440 or #25435 dependin g on year. Sold as pairs. US Patent No. 7,513,514.\nAdjustable front upper control arms for the 4th \u0026amp; 5th Generation 4Runner, FJ Cruiser, and Lexus GX with forged steel connstruction, sealed modern architecture ball joints, and xAxis™ seald flex joint joints in bonded rubber bushings\nProduct appearance and features may vary in the market as design changes, improvements and modifications are implemented.\n\u003cul\u003e\n  \u003cli\u003eNew ball joint has 25% larger stud cross section than OE for superior strength \u0026amp; E-Nickel coating for superior corrosion protection while providing 80° of articulation \u0026amp; extended threads make these arms compatible with knuckle gusset kits\u003c\/li\u003e\n  \u003cli\u003eArm's adjustment range combine with OE adjusters corrects alignment angles for improved drivability and reduced tire wear \u0026amp; makes it possible to move the tire forward to maximize clearance for 33’s without frame or fender modifications\u003c\/li\u003e\n  \u003cli\u003eOne piece polymer race Ball Joint with modern grease formula ensures quiet smooth operation \u0026amp; low turning torque for reduced wear and extended life that tests like OE\u003c\/li\u003e\n  \u003cli\u003eNew xAxis™ sealed flex joints in bonded rubber bushings allow for extended suspension travel \u0026amp; superior noise vibration and harshness (NVH) characteristics\u003c\/li\u003e\n  \u003cli\u003eForged steel arm construction provides maximum strength \u0026amp; clearance with additional caster provision for lifted vehicles built-in\u003c\/li\u003e\n  \u003cli\u003eNew fully sealed ball joint architecture keeps grease in and contaminants out for a maintenance-free joint\u003c\/li\u003e\n  \u003cli\u003eFront Adjustment Range: Camber ±2.00° \/ Caster 0.00° to +4.00°\u003c\/li\u003e\n  \u003cli\u003eFront Adjustment Range: Camber ±2.00˚ \/ Caster 0.00˚ to +4.00°\u003c\/li\u003e\n  \u003cli\u003eRequired: 1 per axle\u003c\/li\u003e\n  \u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImprove suspension geometry, handling, tire wear and wheel-well clearance with SPC Performance part number 35480 adjustable front upper control arms. Designed, engineered, tested and assembled in Colorado, these control arms are intended for the 4th- and 5th-generation Toyota 4Runner, Toyota FJ Cruiser and Lexus GX applications. They provide built-in positive caster for lifted vehicles, helping restore alignment angles and reduce wandering or other handling concerns caused by suspension lifts. Sold as a pair, with one pair required per axle.\u003cbr\u003eForged steel construction delivers the strength and durability needed for demanding off-road and street use while maintaining improved clearance around the spring bucket. The adjustable arm range works with the original-equipment lower adjusters to correct camber and caster, center the tire in the wheel well and help position the tire forward for improved clearance with 33-inch tires without frame or fender modifications. The patented SPC ball joint design also provides additional adjustment for oversized-tire fitment and is compatible with knuckle gusset kits due to its extended threads.\u003cbr\u003eThe sealed, maintenance-free ball joints feature a stud cross section larger than the original-equipment design, E-Nickel corrosion protection and up to 80 degrees of articulation. A one-piece polymer race and modern grease formula support quiet operation, low turning torque and extended service life while keeping contaminants out. New xAxis sealed flex joints in bonded rubber sleeves allow increased suspension travel and help preserve factory-like noise, vibration and harshness characteristics.\u003cbr\u003eFeatures: Front camber adjustment from -2.00 to +2.00 degrees and caster adjustment from 0.00 to +4.00 degrees. Features: Fully sealed ball joint architecture requires no routine greasing. Features: Compatible replacement lower adjustment cams may be available separately under SPC Performance part number 25440 or 25435, depending on vehicle year. Product appearance and features may vary as design changes, improvements and modifications are implemented. This product may contain chemicals known to the State of California to cause cancer or reproductive harm.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eForged steel upper control arms provide high strength, durability and improved spring-bucket clearance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable design helps correct camber and caster angles on lifted vehicles\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBuilt-in positive caster helps restore drivability and reduce wandering\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHelps center the tire in the wheel well and improve clearance for 33-inch tires\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaintenance-free sealed ball joints keep grease in and contaminants out\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBall joint provides up to 80 degrees of articulation and extended threads for knuckle gusset compatibility\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eE-Nickel-coated ball joint stud improves corrosion protection\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003exAxis sealed flex joints in bonded rubber bushings support suspension travel and reduced NVH\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFront adjustment range: Camber -2.00 to +2.00 degrees; caster 0.00 to +4.00 degrees\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSold as a pair; one pair required per axle\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\nCompatible With\u003cbr\u003e\n2003 Lexus GX470\u003cbr\u003e\n2003 Toyota 4Runner\u003cbr\u003e\n2004 Lexus GX470\u003cbr\u003e\n2004 Toyota 4Runner\u003cbr\u003e\n2005 Lexus GX470\u003cbr\u003e\n2005 Toyota 4Runner\u003cbr\u003e\n2006 Lexus GX470\u003cbr\u003e\n2006 Toyota 4Runner\u003cbr\u003e\n2007 Lexus GX470\u003cbr\u003e\n2007 Toyota 4Runner\u003cbr\u003e\n2007 Toyota FJ Cruiser\u003cbr\u003e\n2008 Lexus GX470\u003cbr\u003e\n2008 Toyota 4Runner\u003cbr\u003e\n2008 Toyota FJ Cruiser\u003cbr\u003e\n2009 Lexus GX470\u003cbr\u003e\n2009 Toyota 4Runner\u003cbr\u003e\n2009 Toyota FJ Cruiser\u003cbr\u003e\n2010 Lexus GX460\u003cbr\u003e\n2010 Toyota 4Runner\u003cbr\u003e\n2010 Toyota FJ Cruiser\u003cbr\u003e\n2011 Lexus GX460\u003cbr\u003e\n2011 Toyota 4Runner\u003cbr\u003e\n2011 Toyota FJ Cruiser\u003cbr\u003e\n2012 Lexus GX460\u003cbr\u003e\n2012 Toyota 4Runner\u003cbr\u003e\n2012 Toyota FJ Cruiser\u003cbr\u003e\n2013 Lexus GX460\u003cbr\u003e\n2013 Toyota 4Runner\u003cbr\u003e\n2013 Toyota FJ Cruiser\u003cbr\u003e\n2014 Lexus GX460\u003cbr\u003e\n2014 Toyota 4Runner\u003cbr\u003e\n2014 Toyota FJ Cruiser\u003cbr\u003e\n2015 Lexus GX460\u003cbr\u003e\n2015 Toyota 4Runner\u003cbr\u003e\n2016 Lexus GX460\u003cbr\u003e\n2016 Toyota 4Runner\u003cbr\u003e\n2017 Lexus GX460\u003cbr\u003e\n2017 Toyota 4Runner\u003cbr\u003e\n2018 Lexus GX460\u003cbr\u003e\n2018 Toyota 4Runner\u003cbr\u003e\n2019 Lexus GX460\u003cbr\u003e\n2019 Toyota 4Runner\u003cbr\u003e\n2020 Lexus GX460\u003cbr\u003e\n2020 Toyota 4Runner\u003cbr\u003e\n2021 Lexus GX460\u003cbr\u003e\n2021 Toyota 4Runner\u003cbr\u003e\n2022 Lexus GX460\u003cbr\u003e\n2022 Toyota 4Runner\u003cbr\u003e\n2023 Lexus GX460\u003cbr\u003e\n2023 Toyota 4Runner\u003cbr\u003e\n2024 Toyota 4Runner","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":50544899653872,"sku":"35480","price":799.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/6242\/3792\/files\/119545dba93e7597e8e177dec95a25aeL.jpg?v=1790487727","url":"https:\/\/overlandgear.co\/products\/spc-performance-35480-adjustable-front-upper-control-arms-for-toyota-4runner-fj-cruiser-and-lexus-gx","provider":"Overland Gear Co","version":"1.0","type":"link"}