{"product_id":"icon-k53065t-stage-5-suspension-system-for-2010-2024-toyota-4runner-and-2010-2014-fj-cruiser","title":"ICON K53065T Stage 5 Suspension System for 2010-2024 Toyota 4Runner and 2010-2014 FJ Cruiser","description":"ICON Vehicle Dynamics 2010-2024 Toyota 4Runner and 2010-2014 Toyota FJ Cruiser suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. This Stage 5 system includes vehicle-specific tuned, extended travel 2.5” coilover shocks featuring remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable for 0-3.5” of front lift over stock, allowing the use of larger, more aggressive wheel and tire combinations. Tubular Delta Joint upper control arms not only add strength and durability, but help retain factory alignment specs, increasing caster over stock and allow proper wheel alignment at the lift height this system provides. ICON's tubular steel lower links are much stronger than the OE units, feature a low maintenance multi-durometer bushing, and can be adjusted for optimum pinion angle. ICON rear coil springs deliver on-road comfort and superior off-road performance with 2” of rear lift height over stock for a level stance front to rear. The 2.5 Aluminum Series rear shocks’ larger diameter offers outstanding performance off-road and a smooth ride on the street. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping, keeping the shocks at a cooler operating temperature during heavy use. They also feature a unique internal Bump Zone that creates an additional 20% of damping force to help better control hard bottom outs. The ICON Vehicle Dynamics Toyota 4Runner and Toyota FJ Cruiser Stage 5 system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\nICON suspension systems lift your 4Runner or FJ Cruiser while improving ride quality and performance. With endless hours spent testing and tuning our suspension components and shocks, you’ll have the best suspension solution on the market.\nAPPLICATION NOTE #46: Suspension system compatible with KDSS. Front sway bar relocation brackets not used for KDSS equipped vehicles. Certain years require trimming for front reservoir bracket fitment.\n\u003cul\u003e\n  \u003cli\u003eExtended Travel remote reservoir coilovers matched with ICON UCAs provide increased front droop travel\u003c\/li\u003e\n  \u003cli\u003eTubular rear lower links offer increased strength, improved geometry, and pinion angle adjustment\u003c\/li\u003e\n  \u003cli\u003eTubular upper control arms for added strength, durability, and improved alignment geometry\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned front and rear shocks for superior shock damping and control\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock body with 7\/8\" shaft\u003c\/li\u003e\n  \u003cli\u003e2.5 Aluminum Series remote reservoir rear shocks with 7\/8\" shafts\u003c\/li\u003e\n  \u003cli\u003eFK Rod End bearings for extended longevity and minimal deflection\u003c\/li\u003e\n  \u003cli\u003eBolt-on system means no cutting or welding necessary for install\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers provide 0-3.5\" of front lift height\u003c\/li\u003e\n  \u003cli\u003e6061 aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eIncreased wheel travel and ride quality over stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe ICON K53065T Stage 5 Suspension System is engineered for serious Toyota 4Runner and FJ Cruiser drivers who want improved control, ride quality, and off-road capability. Designed for 2010-2024 Toyota 4Runner and 2010-2014 Toyota FJ Cruiser applications, this complete system combines vehicle-specific tuned shocks, height-adjustable front coilovers, ICON coil springs, tubular upper control arms, and reinforced rear lower links. The result is increased wheel travel, improved damping, and a more controlled ride on pavement and challenging terrain.\u003cbr\u003eThe extended-travel front coilover shocks feature remote reservoirs for improved cooling during demanding use and provide adjustable front lift from stock height up to 3.5 inches. ICON-engineered coil springs enhance vehicle feel throughout the suspension travel, while tubular Delta Joint upper control arms improve strength, durability, caster, and alignment geometry. The included tubular steel rear lower links provide additional strength, reduced deflection, and pinion angle adjustment. Rear coil springs add approximately 2 inches of lift for a level stance and pair with 2.5 Aluminum Series remote reservoir shocks for smooth street performance and reliable off-road damping.\u003cbr\u003eThis bolt-on suspension system requires no cutting or welding and is compatible with KDSS. KDSS-equipped vehicles do not use the front sway bar relocation brackets, and certain applications may require trimming for proper front reservoir bracket clearance. The front coilover bodies use corrosion-resistant CAD plating and 7\/8-inch shafts, while the rear shocks feature ICON’s internal Bump Zone for added damping control during hard compression events. Aircraft-grade 6061 aluminum components and FK rod end bearings support long-term durability with minimal deflection. Professional installation and a final alignment are recommended after installation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eExtended-travel remote reservoir front coilovers and ICON upper control arms increase front droop travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable front coilovers provide 0-3.5 inches of lift over stock\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle-specific tuned front and rear shocks improve damping, handling, and ride control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTubular Delta Joint upper control arms improve strength, durability, caster, and alignment geometry\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTubular rear lower links increase strength and allow pinion angle adjustment\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eICON rear coil springs provide approximately 2 inches of lift for a level stance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e2.5 Aluminum Series remote reservoir rear shocks provide improved cooling and off-road performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Bump Zone adds damping control during hard bottom-out events\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCorrosion-resistant CAD-plated front shock bodies with 7\/8-inch shafts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFK rod end bearings provide extended service life and minimal deflection\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e6061 aircraft-grade aluminum CNC-machined components offer lightweight durability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBolt-on installation requires no cutting or welding\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with KDSS; front sway bar relocation brackets are not used on KDSS-equipped vehicles\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\nCompatible With\u003cbr\u003e\n2010 Lexus GX460\u003cbr\u003e\n2010 Toyota 4Runner\u003cbr\u003e\n2010 Toyota FJ Cruiser\u003cbr\u003e\n2011 Lexus GX460\u003cbr\u003e\n2011 Toyota 4Runner\u003cbr\u003e\n2011 Toyota FJ Cruiser\u003cbr\u003e\n2012 Lexus GX460\u003cbr\u003e\n2012 Toyota 4Runner\u003cbr\u003e\n2012 Toyota FJ Cruiser\u003cbr\u003e\n2013 Lexus GX460\u003cbr\u003e\n2013 Toyota 4Runner\u003cbr\u003e\n2013 Toyota FJ Cruiser\u003cbr\u003e\n2014 Lexus GX460\u003cbr\u003e\n2014 Toyota 4Runner\u003cbr\u003e\n2014 Toyota FJ Cruiser\u003cbr\u003e\n2015 Lexus GX460\u003cbr\u003e\n2015 Toyota 4Runner\u003cbr\u003e\n2016 Lexus GX460\u003cbr\u003e\n2016 Toyota 4Runner\u003cbr\u003e\n2017 Lexus GX460\u003cbr\u003e\n2017 Toyota 4Runner\u003cbr\u003e\n2018 Lexus GX460\u003cbr\u003e\n2018 Toyota 4Runner\u003cbr\u003e\n2019 Lexus GX460\u003cbr\u003e\n2019 Toyota 4Runner\u003cbr\u003e\n2020 Lexus GX460\u003cbr\u003e\n2020 Toyota 4Runner\u003cbr\u003e\n2021 Lexus GX460\u003cbr\u003e\n2021 Toyota 4Runner\u003cbr\u003e\n2022 Lexus GX460\u003cbr\u003e\n2022 Toyota 4Runner\u003cbr\u003e\n2023 Lexus GX460\u003cbr\u003e\n2023 Toyota 4Runner\u003cbr\u003e\n2024 Toyota 4Runner","brand":"ICON","offers":[{"title":"Default Title","offer_id":50543709192432,"sku":"K53065T","price":4856.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/6242\/3792\/files\/cdd9e36b7ebeefb48f6e1929fff13122.jpg?v=1790464516","url":"https:\/\/overlandgear.co\/products\/icon-k53065t-stage-5-suspension-system-for-2010-2024-toyota-4runner-and-2010-2014-fj-cruiser","provider":"Overland Gear Co","version":"1.0","type":"link"}