{"product_id":"icon-k53063t-stage-3-suspension-system-with-tubular-upper-control-arms-for-2010-2024-toyota-4runner-and-2010-2014-toyota-fj-cruiser","title":"ICON K53063T Stage 3 Suspension System with Tubular Upper Control Arms for 2010-2024 Toyota 4Runner and 2010-2014 Toyota FJ Cruiser","description":"ICON Vehicle Dynamics 2010-2024 Toyota 4Runner and 2010-2014 Toyota FJ Cruiser suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. This Stage 3 system includes vehicle-specific tuned 2.5” coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable for 0-3.5” of front lift over stock, allowing the use of larger, more aggressive wheel and tire combinations. Their extended travel length improves performance by increasing front wheel travel and require the addition of ICON front upper control arms. Tubular Delta Joint upper control arms not only add strength and durability, but help retain factory alignment specs, increasing caster over stock and allow proper wheel alignment at the lift height this system provides. ICON's tubular steel lower links are much stronger than the OE units, feature a low maintenance multi-durometer bushing, and can be adjusted for optimum pinion angle. ICON rear coil springs deliver on-road comfort and superior off-road performance with 2” of rear lift height over stock for a level stance front to rear. ICON 2.0 Aluminum Series internal reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2010-2024 Toyota 4Runner and 2010-2014 Toyota FJ Cruiser Stage 3 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\nICON suspension systems lift your 4Runner or FJ Cruiser while improving ride quality and performance. With endless hours spent testing and tuning our suspension components and shocks, you’ll have the best suspension solution on the market.\nAPPLICATION NOTE #111: Bump stop spacer kit available that can be installed to increase threads showing beyond max recommendation.\n\u003cul\u003e\n  \u003cli\u003eTubular rear lower links offer increased strength, improved geometry, and pinion angle adjustment\u003c\/li\u003e\n  \u003cli\u003eTubular upper control arms for added strength, durability, and improved alignment geometry\u003c\/li\u003e\n  \u003cli\u003eExtended Travel coilovers matched with ICON UCA provides increased front droop travel\u003c\/li\u003e\n  \u003cli\u003eVehicle specific tuned front and rear shocks for superior shock damping and control\u003c\/li\u003e\n  \u003cli\u003e2.0 Aluminum Series rear internal reservoir shocks with 5\/8\" shafts\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated coilover shock body with 7\/8\" shaft\u003c\/li\u003e\n  \u003cli\u003eFK Rod End bearings for extended longevity and minimal deflection\u003c\/li\u003e\n  \u003cli\u003eBolt-on system means no cutting or welding necessary for install\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers provide 0-3.5\" of front lift height\u003c\/li\u003e\n  \u003cli\u003e6061 aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eIncreased wheel travel and ride quality over stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade your Toyota 4Runner or FJ Cruiser with the ICON Vehicle Dynamics K53063T Stage 3 Suspension System, engineered to improve wheel travel, damping performance, ride quality, and vehicle control on pavement and off-road terrain. This complete suspension solution combines vehicle-specific shock tuning with durable, adjustable components designed for serious drivers who want enhanced capability without sacrificing everyday drivability. The bolt-on design requires no cutting or welding for installation.\u003cbr\u003eThe system includes height-adjustable front 2.5-inch coilovers with internal reservoirs, corrosion-resistant CAD-plated bodies, 7\/8-inch shafts, and ICON-engineered coil springs. The coilovers provide 0 to 3.5 inches of front lift over stock, helping accommodate larger wheel and tire combinations while increasing front droop travel. Tubular Delta Joint upper control arms improve strength, durability, and alignment geometry while helping maintain factory alignment specifications and increase caster at the lifted ride height. FK rod-end bearings support long service life with minimal deflection.\u003cbr\u003eAt the rear, ICON coil springs provide approximately 2 inches of lift for a balanced stance, comfortable on-road ride, and improved off-road performance. Tubular steel lower links offer greater strength than original equipment components, improved suspension geometry, and adjustable pinion angle control through low-maintenance multi-durometer bushings. Vehicle-specific tuned ICON 2.0 Aluminum Series internal-reservoir rear shocks feature 5\/8-inch shafts and are matched to the front system for controlled damping from end to end.\u003cbr\u003eDesigned for 2010-2024 Toyota 4Runner models and 2010-2014 Toyota FJ Cruiser applications, the ICON K53063T Stage 3 system delivers increased travel, improved handling, and dependable performance across varied terrain. A bump stop spacer kit is available separately for applications requiring additional threads beyond the maximum recommended adjustment.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTubular rear lower links provide increased strength, improved suspension geometry, and adjustable pinion angle control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTubular Delta Joint upper control arms add strength, durability, and improved alignment geometry\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended-travel front coilovers work with ICON upper control arms to increase front droop travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle-specific tuned front and rear shocks deliver improved damping and vehicle control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e2.0 Aluminum Series rear internal-reservoir shocks feature 5\/8-inch shafts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCorrosion-resistant CAD-plated coilover bodies feature 7\/8-inch shafts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFK rod-end bearings provide extended longevity and minimal deflection\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBolt-on installation requires no cutting or welding\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable front coilovers provide 0 to 3.5 inches of lift over stock\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e6061 aircraft-grade aluminum CNC-machined components provide strength and precision\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncreased wheel travel and improved ride quality compared with stock suspension\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\nCompatible With\u003cbr\u003e\n2010 Lexus GX460\u003cbr\u003e\n2010 Toyota 4Runner\u003cbr\u003e\n2010 Toyota FJ Cruiser\u003cbr\u003e\n2011 Lexus GX460\u003cbr\u003e\n2011 Toyota 4Runner\u003cbr\u003e\n2011 Toyota FJ Cruiser\u003cbr\u003e\n2012 Lexus GX460\u003cbr\u003e\n2012 Toyota 4Runner\u003cbr\u003e\n2012 Toyota FJ Cruiser\u003cbr\u003e\n2013 Lexus GX460\u003cbr\u003e\n2013 Toyota 4Runner\u003cbr\u003e\n2013 Toyota FJ Cruiser\u003cbr\u003e\n2014 Lexus GX460\u003cbr\u003e\n2014 Toyota 4Runner\u003cbr\u003e\n2014 Toyota FJ Cruiser\u003cbr\u003e\n2015 Lexus GX460\u003cbr\u003e\n2015 Toyota 4Runner\u003cbr\u003e\n2016 Lexus GX460\u003cbr\u003e\n2016 Toyota 4Runner\u003cbr\u003e\n2017 Lexus GX460\u003cbr\u003e\n2017 Toyota 4Runner\u003cbr\u003e\n2018 Lexus GX460\u003cbr\u003e\n2018 Toyota 4Runner\u003cbr\u003e\n2019 Lexus GX460\u003cbr\u003e\n2019 Toyota 4Runner\u003cbr\u003e\n2020 Lexus GX460\u003cbr\u003e\n2020 Toyota 4Runner\u003cbr\u003e\n2021 Lexus GX460\u003cbr\u003e\n2021 Toyota 4Runner\u003cbr\u003e\n2022 Lexus GX460\u003cbr\u003e\n2022 Toyota 4Runner\u003cbr\u003e\n2023 Lexus GX460\u003cbr\u003e\n2023 Toyota 4Runner\u003cbr\u003e\n2024 Toyota 4Runner","brand":"ICON","offers":[{"title":"Default Title","offer_id":50543709028592,"sku":"K53063T","price":3636.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/6242\/3792\/files\/a3ddc43d24f9614bd98dcfd76c22a040.jpg?v=1790464510","url":"https:\/\/overlandgear.co\/products\/icon-k53063t-stage-3-suspension-system-with-tubular-upper-control-arms-for-2010-2024-toyota-4runner-and-2010-2014-toyota-fj-cruiser","provider":"Overland Gear Co","version":"1.0","type":"link"}