{"product_id":"icon-k22103-stage-3-2-5-inch-suspension-system-for-2020-jeep-gladiator-jt","title":"ICON K22103 Stage 3 2.5-Inch Suspension System for 2020+ Jeep Gladiator JT","description":"The Stage 3 ICON 2.5” Suspension System for the Jeep Gladiator is the ideal setup for significantly improving on-road ride quality for the daily driven application that will see occasional moderate off-road use. This complete suspension system features 2.0 Aluminum Series shocks, 2.5” lift dual-rate front coil springs, a tubular steel fixed front lower link kit, billet front sway bar links, a triple-rate rear coil spring kit, a rear sway bar relocation kit, and all necessary hardware for install. This system provides an increase of over 30% front and 20% rear wheel travel and was designed around the use of a 35” tire. For those looking to run a 37” tire this can be achieved with the ICON Jeep JT Bump Stop Spacer Kit (Part #22071).\n2020-UP JEEP GLADIATOR JT 2.5\" STAGE 3 SUSPENSION SYSTEM\nTECH NOTE: ICON’s advertised lift heights are based around a typical Jeep JT build which usually includes added weight of accessories such as heavier front bumper\/winch. Lift heights may be higher than advertised if installed on a stock weighted vehicle.\n\u003cul\u003e\n  \u003cli\u003e“ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability\u003c\/li\u003e\n  \u003cli\u003eFront lower links included for caster angle correction and improved front end articualtion\u003c\/li\u003e\n  \u003cli\u003eTriple rate rear coil springs with ICON-engineered droop, ride, and overload rates\u003c\/li\u003e\n  \u003cli\u003eDual rate front coil springs with lifetime guarantee against sagging\/breakage\u003c\/li\u003e\n  \u003cli\u003e2.0 Aluminum Series shocks with vehicle specific valving\u003c\/li\u003e\n  \u003cli\u003eFits 35\" tires (37\" with extended bump stop spacer kit)\u003c\/li\u003e\n  \u003cli\u003eImproves on and off-road ride quality over stock\u003c\/li\u003e\n  \u003cli\u003eAdjustable, billet aluminum front sway bar links\u003c\/li\u003e\n  \u003cli\u003e100% bolt-on system makes for an easy install\u003c\/li\u003e\n  \u003cli\u003e33% front, 23% rear increase in wheel travel\u003c\/li\u003e\n  \u003cli\u003e2.5\" lift height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade your 2020 and newer Jeep Gladiator JT with the ICON K22103 Stage 3 2.5-inch Suspension System, engineered to improve ride quality, handling, wheel travel, and off-road capability. Designed for daily-driven Gladiators that see occasional moderate trail use, this complete suspension package combines vehicle-specific components and tuned performance for a balanced on-road and off-road driving experience. The system is designed around 35-inch tires and can accommodate 37-inch tires when paired with the ICON bump stop spacer kit, part number 22071.\u003cbr\u003eThe ICON K22103 system includes 2.0 Aluminum Series shocks with vehicle-specific valving, 2.5-inch lift dual-rate front coil springs, triple-rate rear coil springs, tubular steel fixed front lower links, adjustable billet aluminum front sway bar links, a rear sway bar relocation kit, and installation hardware. The front lower links help correct caster angle and improve front-end articulation, while the engineered coil spring rates support controlled movement, ride comfort, and load management. ICON front coil springs are backed by a lifetime guarantee against sagging or breakage.\u003cbr\u003eValidated through ICON 1K testing under demanding off-road conditions, this suspension system is designed for strength, durability, and consistent performance. It provides approximately 33% more front wheel travel and 23% more rear wheel travel than stock, along with a 2.5-inch lift height. The 100% bolt-on design simplifies installation without requiring extensive modification. Actual lift height may vary depending on vehicle configuration and added accessories, such as a heavier front bumper or winch.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eICON 1K tested under rigorous off-road conditions for verified tune, performance, strength, and durability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e2.5-inch lift height for improved ground clearance and suspension capability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e2.0 Aluminum Series shocks with vehicle-specific valving\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDual-rate front coil springs with a lifetime guarantee against sagging or breakage\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTriple-rate rear coil springs engineered for controlled droop, ride quality, and overload support\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTubular steel fixed front lower links for caster correction and improved front-end articulation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable billet aluminum front sway bar links\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRear sway bar relocation kit included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApproximately 33% increase in front wheel travel and 23% increase in rear wheel travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for 35-inch tires; supports 37-inch tires with ICON bump stop spacer kit part number 22071\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e100% bolt-on installation design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits 2020 and newer Jeep Gladiator JT models\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\nCompatible With\u003cbr\u003e\n2020 Jeep Gladiator\u003cbr\u003e\n2021 Jeep Gladiator\u003cbr\u003e\n2022 Jeep Gladiator","brand":"ICON","offers":[{"title":"Default Title","offer_id":50543885451504,"sku":"K22103","price":2029.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/6242\/3792\/files\/e45424c128ed8166e7fc1b9c50985913.jpg?v=1790468190","url":"https:\/\/overlandgear.co\/products\/icon-k22103-stage-3-2-5-inch-suspension-system-for-2020-jeep-gladiator-jt","provider":"Overland Gear Co","version":"1.0","type":"link"}