{"product_id":"icon-k22014-2-5-inch-stage-4-suspension-system-for-2018-jeep-wrangler-jl","title":"ICON K22014 2.5-Inch Stage 4 Suspension System for 2018+ Jeep Wrangler JL","description":"The ICON Vehicle Dynamics Stage 4 2.5\" Suspension System for the 2018-UP Jeep Wrangler JL is designed for the driver looking to drastically improve the performance and ride quality of their vehicle. This Stage 4 system includes 2.5\" lift dual rate coil springs, Vehicle Specific 2.0 Aluminum Series shocks, tubular steel adjustable front upper links, fixed front lower links, fixed rear upper links, adjustable rear lower links, adjustable front and rear track bars, bump stop spacers, sway bar links, and all necessary hardware to complete the installation. With this combination of components, ICON was able to increase wheel travel numbers by over 30% (3\" front, 2\" rear), redefining the potential of the 2018-UP JL. The front lower links included with this system are constructed from thick wall steel tubing, provide increased castor numbers, and feature dual durometer bushings for noise free operation, maximum articulation, and minimal bind. The Stage 4 system allows for fitment of 35\" tires when used with ICON's recommended wheel specifications. For users looking to install 37\" tires, an optional bump stop spacer kit (PN: 22029) is available.\n2018-UP JEEP JL 2.5\" LIFT STAGE 4 SUSPENSION SYSTEM\nTECH NOTE: ICON’s advertised lift heights are based around a typical Jeep JL build which usually includes added weight of accessories such as heavier front bumper\/winch and heavier rear bumper\/spare tire. Lift heights may be higher than advertised if installed on a stock weighted vehicle.\n\u003cul\u003e\n  \u003cli\u003eTubular steel link arms with dual durometer bushings for noise free performance, maximum articulation, and minimal bind\u003c\/li\u003e\n  \u003cli\u003e“ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability\u003c\/li\u003e\n  \u003cli\u003eDual rate coil springs with lifetime guarantee against sagging\/breakage\u003c\/li\u003e\n  \u003cli\u003eFits 35\" tires (37\" with optional bump stop spacer kit PN: 22029)\u003c\/li\u003e\n  \u003cli\u003e2.0 Aluminum Series shocks with vehicle specific valving\u003c\/li\u003e\n  \u003cli\u003eImproves on and off-road ride quality over stock\u003c\/li\u003e\n  \u003cli\u003e100% bolt-on system makes for an easy install\u003c\/li\u003e\n  \u003cli\u003e3\" front, 2\" rear increase in wheel travel\u003c\/li\u003e\n  \u003cli\u003e2.5\" lift height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics K22014 Stage 4 Suspension System is engineered for 2018 and newer Jeep Wrangler JL models seeking improved ride quality, off-road capability, and suspension performance. This complete system includes 2.5-inch lift dual-rate coil springs, vehicle-specific ICON 2.0 Aluminum Series shocks, adjustable and fixed tubular steel suspension links, adjustable front and rear track bars, sway bar links, bump stop spacers, and installation hardware. The 100% bolt-on design supports a straightforward installation without requiring extensive fabrication.\u003cbr\u003eDesigned and tested through ICON’s rigorous “ICON 1K” validation process, the K22014 system improves handling and ride quality both on and off the road. Its vehicle-specific shock valving is matched to the Wrangler JL platform, while the dual-rate coil springs provide controlled suspension movement and are backed by a lifetime guarantee against sagging or breakage. The included tubular steel link arms use dual-durometer bushings to support quiet operation, increased articulation, and reduced suspension bind.\u003cbr\u003eThis ICON suspension system increases wheel travel by approximately 3 inches at the front and 2 inches at the rear, helping the Wrangler better maintain traction over uneven terrain. It supports fitment of 35-inch tires when used with ICON’s recommended wheel specifications. An optional ICON bump stop spacer kit, part number 22029, is available for applications using 37-inch tires. Advertised lift height is based on a typical Jeep JL equipped with additional accessories, such as a heavier front bumper, winch, rear bumper, or spare tire; lift height may vary on a stock-weight vehicle.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2.5-inch lift height for 2018+ Jeep Wrangler JL models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle-specific ICON 2.0 Aluminum Series shocks with tuned valving\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDual-rate coil springs with a lifetime guarantee against sagging and breakage\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTubular steel link arms with dual-durometer bushings for quiet operation and reduced bind\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable front and rear track bars for improved axle positioning\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFixed front lower and rear upper links with adjustable rear lower links\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApproximately 3 inches of additional front wheel travel and 2 inches of additional rear wheel travel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSupports 35-inch tires with ICON-recommended wheel specifications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOptional bump stop spacer kit part number 22029 supports 37-inch tire applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e100% bolt-on installation design with included hardware\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eICON 1K tested for off-road performance, strength, durability, and suspension tuning\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eImproves on-road comfort and off-road suspension performance over stock\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\nCompatible With\u003cbr\u003e\n2018 Jeep Wrangler\u003cbr\u003e\n2019 Jeep Wrangler\u003cbr\u003e\n2020 Jeep Wrangler\u003cbr\u003e\n2021 Jeep Wrangler\u003cbr\u003e\n2022 Jeep Wrangler","brand":"ICON","offers":[{"title":"Default Title","offer_id":50543879094512,"sku":"K22014","price":3747.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/6242\/3792\/files\/5a93f0e97dce69999490e35ffe848549.jpg?v=1790468059","url":"https:\/\/overlandgear.co\/products\/icon-k22014-2-5-inch-stage-4-suspension-system-for-2018-jeep-wrangler-jl","provider":"Overland Gear Co","version":"1.0","type":"link"}