{"product_id":"icon-k22011-2-5-inch-stage-1-suspension-system-for-2018-jeep-wrangler-jl","title":"ICON K22011 2.5-Inch Stage 1 Suspension System for 2018+ Jeep Wrangler JL","description":"Holistic Engineering - the ICON Difference: When developing suspension components for a new vehicle, ICON takes a different approach than many others. Rather than focusing in on one particular part, ICON engineers look at the vehicle as a whole, identify inherent strengths and weaknesses, and set a target for performance. With a focus on maximizing wheel travel and improving ride quality, ICON will develop components that address (and often times replace) OE limiting factors. This \"holistic engineering\" philosophy often results in the development of several parts designed to work together as a system to provide a balanced on and off-road performance upgrade. Because ICON is designing and manufacturing all of the components necessary to improve the performance of a vehicle from front to back, end-users can rest easy knowing they are dealing with ONE manufacturer, ONE standard of quality, and ONE awesome warranty to back it all up.\n2018-UP JEEP JL 2.5\" LIFT STAGE 1 SUSPENSION SYSTEM\nTECH NOTE: ICON’s advertised lift heights are based around a typical Jeep JL build which usually includes added weight of accessories such as heavier front bumper\/winch and heavier rear bumper\/spare tire. Lift heights may be higher than advertised if installed on a stock weighted vehicle.\n\u003cul\u003e\n  \u003cli\u003e“ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability\u003c\/li\u003e\n  \u003cli\u003eFits 35\" tires (37\" with optional extended bump stop spacer kit PN: 22029)\u003c\/li\u003e\n  \u003cli\u003eDual rate coil springs with lifetime guarantee against sagging\/breakage\u003c\/li\u003e\n  \u003cli\u003e2.0 Aluminum Series shocks with vehicle specific valving\u003c\/li\u003e\n  \u003cli\u003eImproves on and off-road ride quality over stock\u003c\/li\u003e\n  \u003cli\u003e100% bolt-on system makes for an easy install\u003c\/li\u003e\n  \u003cli\u003e3\" front, 2\" rear increase in wheel travel\u003c\/li\u003e\n  \u003cli\u003e2.5\" lift height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe ICON K22011 2.5-inch Stage 1 Suspension System is engineered for 2018 and newer Jeep Wrangler JL models seeking improved ride quality, increased wheel travel, and stronger off-road performance. ICON uses a holistic engineering approach, evaluating the vehicle as a complete system rather than designing isolated components. This balanced suspension upgrade addresses factory limitations while maintaining dependable on-road manners and capable trail performance.\u003cbr\u003eThe system includes dual-rate coil springs with a lifetime guarantee against sagging or breakage and ICON 2.0 Aluminum Series shocks featuring vehicle-specific valving. The shocks are ICON 1K tested under demanding off-road conditions to help validate performance, tuning, strength, and durability. Together, these components provide a controlled ride over uneven terrain while improving overall suspension response compared with the original equipment setup.\u003cbr\u003eThe ICON K22011 provides a 2.5-inch lift and increases wheel travel by 3 inches in the front and 2 inches in the rear. It accommodates tires up to 35 inches, or up to 37 inches when used with the optional extended bump stop spacer kit, part number 22029. Designed as a 100% bolt-on system, the kit supports a straightforward installation without requiring extensive fabrication or vehicle modifications. It is engineered to work as a complete ICON system for consistent quality and performance throughout the suspension.\u003cbr\u003eThis Stage 1 suspension system is designed for Jeep Wrangler JL applications from 2018 onward. Advertised lift height is based on a typical build with added accessory weight, such as a heavier front bumper and winch or a heavier rear bumper and spare tire. A stock-weight vehicle may sit higher than the advertised lift height.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2.5-inch lift height for 2018+ Jeep Wrangler JL models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDual-rate coil springs with a lifetime guarantee against sagging and breakage\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eICON 2.0 Aluminum Series shocks with vehicle-specific valving\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eICON 1K tested under rigorous off-road conditions for performance, strength, and durability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncreases front wheel travel by 3 inches and rear wheel travel by 2 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits tires up to 35 inches, or 37 inches with optional extended bump stop spacer kit part number 22029\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eImproves on-road and off-road ride quality compared with the stock suspension\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e100% bolt-on design supports an easier installation\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\nCompatible With\u003cbr\u003e\n2018 Jeep Wrangler\u003cbr\u003e\n2019 Jeep Wrangler\u003cbr\u003e\n2020 Jeep Wrangler\u003cbr\u003e\n2021 Jeep Wrangler\u003cbr\u003e\n2022 Jeep Wrangler","brand":"ICON","offers":[{"title":"Default Title","offer_id":50543884239088,"sku":"K22011","price":1438.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/6242\/3792\/files\/f0b8704c9bb43d0ccd41e6755ae571f9.jpg?v=1790468177","url":"https:\/\/overlandgear.co\/products\/icon-k22011-2-5-inch-stage-1-suspension-system-for-2018-jeep-wrangler-jl","provider":"Overland Gear Co","version":"1.0","type":"link"}