{"product_id":"icon-58647-700-v-s-2-5-series-front-extended-travel-coilover-kit-with-700-lb-in-springs","title":"ICON 58647-700 V.S. 2.5 Series Front Extended-Travel Coilover Kit with 700 lb\/in Springs","description":"ICON Vehicle Dynamics V.S. 2.5 Series internal reservoir front coilover shocks are an incredible upgrade for the front end of the 2010-2024 Toyota 4Runner, 2010-2014 Toyota FJ Cruiser, and 2010-2023 Lexus GX460. These adjustable coilovers allow up to 0-3.5” of lift height adjustability, allowing the use of larger, more aggressive wheel and tire combinations. Their extended travel shock length yields the maximum travel possible with aftermarket front upper control arms and ICON’s Vehicle-specific valving along with the larger 2.5” shock body and increased piston area over stock components provide superior ride quality and suspension performance both on- and off-road. Coil springs with increased spring rate are included to help support added weight of accessories such as bumpers, winches, etc., and help ensure proper lift heights for heavier equipped vehicles. When paired with ICON 2.0 or 2.5 Aluminum Series rear shock absorbers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Toyota 4Runner, FJ Cruiser or Lexus GX460.\nThese extended length ICON VS 2.5 Series coilovers offer increased wheel travel but also require the installation of aftermarket upper control arms. They are vehicle specific, 100% rebuildable, and 100% revalveable.\nTECH NOTE: 700lb\/in spring rate only recommended for trucks with additional weight added to front end. See ICON Help Center for information.\n\u003cul\u003e\n  \u003cli\u003eIncreased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use\u003c\/li\u003e\n  \u003cli\u003eHigh quality ICON-engineered coil springs with higher spring rate included to better support added weight to front end\u003c\/li\u003e\n  \u003cli\u003eFully serviceable design allows for revalves, rebuilds, and an immeasurable service life\u003c\/li\u003e\n  \u003cli\u003eExtended Travel length requires installation of aftermarket front upper control arms\u003c\/li\u003e\n  \u003cli\u003eSuperior low speed control reduces body roll and increases on-road stability\u003c\/li\u003e\n  \u003cli\u003eFK Rod End bearings provide extended longevity and minimal deflection\u003c\/li\u003e\n  \u003cli\u003eBolt-in design makes for an easy install into OEM shock location\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistant CAD plated shock body with 7\/8\" shaft\u003c\/li\u003e\n  \u003cli\u003eAdjustable coilovers yield 0-3.5\" of front lift height\u003c\/li\u003e\n  \u003cli\u003eCoil springs rated at 700 lb-in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade the front suspension of your 2010–2024 Toyota 4Runner, 2010–2014 Toyota FJ Cruiser, or 2010–2023 Lexus GX460 with the ICON Vehicle Dynamics V.S. 2.5 Series internal-reservoir coilover kit, part number 58647-700. Designed for demanding on-road and off-road use, this vehicle-specific system provides adjustable front lift from 0 to 3.5 inches while increasing wheel travel and improving suspension control. The included 700 lb\/in ICON-engineered coil springs help support additional front-end weight from accessories such as bumpers, winches, and other equipment.\u003cbr\u003eThe extended-travel design works with aftermarket front upper control arms to maximize available suspension travel. ICON vehicle-specific valving, a larger 2.5-inch shock body, and increased piston area deliver improved ride quality, superior low-speed control, reduced body roll, and enhanced stability compared with stock components. When combined with ICON 2.0 or 2.5 Aluminum Series rear shocks, the system helps provide balanced suspension performance from front to rear.\u003cbr\u003eThe ICON 58647-700 coilovers feature a bolt-in installation design for the OEM shock location, corrosion-resistant CAD-plated shock bodies, 7\/8-inch shafts, and durable FK rod-end bearings that minimize deflection and support long-term performance. The fully serviceable construction allows the shocks to be rebuilt or revalved, providing a long service life for drivers who regularly use their vehicles on challenging terrain. The 700 lb\/in spring rate is recommended for vehicles carrying additional front-end weight; consult ICON technical guidance to select the appropriate setup for your application.\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cbr\u003e  \u003cli\u003eIncreased wheel travel and vehicle-specific valving improve ride quality on and off the road\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eAdjustable coilovers provide 0–3.5 inches of front lift height\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eICON-engineered 700 lb\/in coil springs support added front-end weight\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eExtended-travel design requires aftermarket front upper control arms\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eFully rebuildable and revalvable for long-term serviceability\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003e2.5-inch shock body and increased piston area improve suspension control\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eFK rod-end bearings provide durability and minimal deflection\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eBolt-in design installs into the OEM shock location\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eCorrosion-resistant CAD-plated shock body with 7\/8-inch shaft\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVehicle-specific front coilover kit for Toyota 4Runner, Toyota FJ Cruiser, and Lexus GX460 applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable 0–3.5-inch front lift range\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e700 lb\/in coil springs support vehicles with added front-end accessories\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eExtended-travel design increases wheel travel and requires aftermarket upper control arms\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle-specific valving improves on-road stability and off-road performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e2.5-inch internal-reservoir shock body with increased piston area\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFully rebuildable and revalvable construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCorrosion-resistant CAD-plated shock body and 7\/8-inch shaft\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFK rod-end bearings minimize deflection and improve durability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBolt-in installation into the OEM shock location\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\nCompatible With\u003cbr\u003e\n2010 Lexus GX460\u003cbr\u003e\n2010 Toyota 4Runner\u003cbr\u003e\n2010 Toyota FJ Cruiser\u003cbr\u003e\n2011 Lexus GX460\u003cbr\u003e\n2011 Toyota 4Runner\u003cbr\u003e\n2011 Toyota FJ Cruiser\u003cbr\u003e\n2012 Lexus GX460\u003cbr\u003e\n2012 Toyota 4Runner\u003cbr\u003e\n2012 Toyota FJ Cruiser\u003cbr\u003e\n2013 Lexus GX460\u003cbr\u003e\n2013 Toyota 4Runner\u003cbr\u003e\n2013 Toyota FJ Cruiser\u003cbr\u003e\n2014 Lexus GX460\u003cbr\u003e\n2014 Toyota 4Runner\u003cbr\u003e\n2014 Toyota FJ Cruiser\u003cbr\u003e\n2015 Lexus GX460\u003cbr\u003e\n2015 Toyota 4Runner\u003cbr\u003e\n2016 Lexus GX460\u003cbr\u003e\n2016 Toyota 4Runner\u003cbr\u003e\n2017 Lexus GX460\u003cbr\u003e\n2017 Toyota 4Runner\u003cbr\u003e\n2018 Lexus GX460\u003cbr\u003e\n2018 Toyota 4Runner\u003cbr\u003e\n2019 Lexus GX460\u003cbr\u003e\n2019 Toyota 4Runner\u003cbr\u003e\n2020 Lexus GX460\u003cbr\u003e\n2020 Toyota 4Runner\u003cbr\u003e\n2021 Lexus GX460\u003cbr\u003e\n2021 Toyota 4Runner\u003cbr\u003e\n2022 Lexus GX460\u003cbr\u003e\n2022 Toyota 4Runner\u003cbr\u003e\n2023 Lexus GX460\u003cbr\u003e\n2023 Toyota 4Runner\u003cbr\u003e\n2024 Toyota 4Runner","brand":"ICON","offers":[{"title":"Default Title","offer_id":50543705784560,"sku":"58647-700","price":1726.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/6242\/3792\/files\/8cbb8707c2f9b08a72c6dfd31df97c69_39e734c1-186f-4af9-bad1-b1cc06ca6a20.jpg?v=1790464433","url":"https:\/\/overlandgear.co\/products\/icon-58647-700-v-s-2-5-series-front-extended-travel-coilover-kit-with-700-lb-in-springs","provider":"Overland Gear Co","version":"1.0","type":"link"}