{"product_id":"icon-57826ep-v-s-2-5-aluminum-series-rear-shocks-with-cdev-for-2016-2017-toyota-tacoma","title":"ICON 57826EP V.S. 2.5 Aluminum Series Rear Shocks with CDEV for 2016-2017 Toyota Tacoma","description":"ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks with CDEV are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. This RXT rear shock features a side-mount eyelet making it shorter in collapsed length, longer at extension, and still fit in the factory mounting location, allowing for additional wheel travel when paired with ICON Multi-Rate Leaf Springs. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks with CDEV are 100% rebuildable and 100% revalveable.\nICON 2.5 Aluminum Series shocks with CDEV are designed to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune.\nAPPLICATION NOTE #198: An iOS operated device is required to run ICON Intelligent Control app\n\u003cul\u003e\n  \u003cli\u003eICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)\u003c\/li\u003e\n  \u003cli\u003eICON exclusive side mounted \"RXT\" rod ends allow for increased shaft travel and compatibility with vehicle's stock shock mounting points\u003c\/li\u003e\n  \u003cli\u003eOne-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road\u003c\/li\u003e\n  \u003cli\u003eICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression\u003c\/li\u003e\n  \u003cli\u003eOne-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish\u003c\/li\u003e\n  \u003cli\u003ePremium grade 5WT shock oil for consistent suspension damping along a wide temperature range\u003c\/li\u003e\n  \u003cli\u003eRemote reservoir design improves heat dissipation to reduce shock fade during prolonged use\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e7\/8” diameter induction hardened, chrome plated shock shaft\u003c\/li\u003e\n  \u003cli\u003eNitrogen charged monotube design with piggyback reservoir\u003c\/li\u003e\n  \u003cli\u003e6061 aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003e100% Revalveable\u003c\/li\u003e\n  \u003cli\u003e100% Rebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eICON Vehicle Specific (V.S.) 2.5 Aluminum Series rear shocks with CDEV are engineered for the 2016-2017 Toyota Tacoma to deliver controlled off-road performance and a comfortable ride on the street. Each shock is application-tuned for proper damping and travel, helping optimize suspension response for the Tacoma platform. The RXT rear shock design uses a side-mounted eyelet to reduce collapsed length while increasing extension travel, allowing additional wheel travel when paired with ICON Multi-Rate Leaf Springs while retaining compatibility with the factory mounting location. This product is supplied as a pair and is identified by ICON part number 57826EP.\u003c\/p\u003e\u003cp\u003eThe CDE Valve technology enables in-vehicle adjustment of compression damping settings through the ICON Intelligent Control (IIC) app, including active adjustment capability. An iOS-operated device is required to run the ICON Intelligent Control app. ICON's exclusive internal Bump Zone increases damping by 20 percent near full compression to help control high-velocity suspension movement and reduce harsh bottom-out behavior. The nitrogen-charged monotube design with piggyback reservoir improves heat dissipation, helping maintain consistent damping during prolonged off-road use.\u003c\/p\u003e\u003cp\u003eEach shock features a one-piece digressive piston with vehicle-specific valving, a hard-anodized impact-extruded aluminum cylinder, premium 5WT shock oil, and a 7\/8-inch induction-hardened, chrome-plated shaft. PTFE-lined spherical bearings, application-specific mounting hardware, and CNC-machined 6061 aircraft-grade aluminum components support long-term durability. ICON V.S. 2.5 Aluminum Series shocks with CDEV are 100 percent rebuildable and 100 percent revalveable, allowing future service and tuning as vehicle use changes.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCDE Valve technology provides in-vehicle compression damping adjustment and active control through the ICON Intelligent Control app\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRXT side-mounted rod ends increase shaft travel while maintaining compatibility with factory shock mounting points\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle-specific digressive piston and valving deliver controlled on-road comfort and off-road performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Bump Zone increases damping by 20 percent near full compression for improved bottom-out control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHard-anodized, impact-extruded aluminum cylinders provide corrosion resistance and a consistent finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePremium 5WT shock oil supports consistent damping across a wide temperature range\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePiggyback reservoir design improves heat dissipation and helps reduce shock fade\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePTFE-lined spherical bearings and application-specific mounting hardware included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e7\/8-inch induction-hardened, chrome-plated shock shaft\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNitrogen-charged monotube shock design with piggyback reservoir\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCNC-machined 6061 aircraft-grade aluminum components\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e100 percent rebuildable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e100 percent revalveable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits 2016-2017 Toyota Tacoma applications\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\nCompatible With\u003cbr\u003e\n2005 Toyota Tacoma\u003cbr\u003e\n2006 Toyota Tacoma\u003cbr\u003e\n2007 Toyota Tacoma\u003cbr\u003e\n2008 Toyota Tacoma\u003cbr\u003e\n2009 Toyota Tacoma\u003cbr\u003e\n2010 Toyota Tacoma\u003cbr\u003e\n2011 Toyota Tacoma\u003cbr\u003e\n2012 Toyota Tacoma\u003cbr\u003e\n2013 Toyota Tacoma\u003cbr\u003e\n2014 Toyota Tacoma\u003cbr\u003e\n2015 Toyota Tacoma\u003cbr\u003e\n2016 Toyota Tacoma\u003cbr\u003e\n2017 Toyota Tacoma\u003cbr\u003e\n2018 Toyota Tacoma\u003cbr\u003e\n2019 Toyota Tacoma\u003cbr\u003e\n2020 Toyota Tacoma\u003cbr\u003e\n2021 Toyota Tacoma\u003cbr\u003e\n2022 Toyota Tacoma\u003cbr\u003e\n2023 Toyota Tacoma","brand":"ICON","offers":[{"title":"Default Title","offer_id":50543800942832,"sku":"57826EP","price":2070.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/6242\/3792\/files\/cab43d9b788a98abb43f06860febe2ab.jpg?v=1790466404","url":"https:\/\/overlandgear.co\/products\/icon-57826ep-v-s-2-5-aluminum-series-rear-shocks-with-cdev-for-2016-2017-toyota-tacoma","provider":"Overland Gear Co","version":"1.0","type":"link"}