{"product_id":"icon-57823ep-rxt-rear-2-5-vs-remote-reservoir-cdev-shocks-for-2014-2021-toyota-tundra-pair","title":"ICON 57823EP RXT Rear 2.5 VS Remote Reservoir CDEV Shocks for 2014-2021 Toyota Tundra, Pair","description":"ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks with CDEV are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. This RXT rear shock features a side-mount eyelet making it shorter in collapsed length, longer at extension, and still fit in the factory mounting location, allowing for additional wheel travel when paired with ICON Multi-Rate Leaf Springs. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks with CDEV are 100% rebuildable and 100% revalveable.\n2014-2021 TUNDRA RXT REAR 2.5 VS REMORE RESERVOIR WITH CDEV SHOCK PAIR\nTECH NOTE: Also requires installation of IIC kit (Part # 53506) and CDEV front coilovers (Part # 58750E)\n\u003cul\u003e\n  \u003cli\u003eICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)\u003c\/li\u003e\n  \u003cli\u003eOne-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road\u003c\/li\u003e\n  \u003cli\u003eICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression\u003c\/li\u003e\n  \u003cli\u003eOne-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish\u003c\/li\u003e\n  \u003cli\u003ePremium grade 5WT shock oil for consistent suspension damping along a wide temperature range\u003c\/li\u003e\n  \u003cli\u003eRemote reservoir design improves heat dissipation to reduce shock fade during prolonged use\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e7\/8” diameter induction hardened, chrome plated shock shaft\u003c\/li\u003e\n  \u003cli\u003eNitrogen charged monotube design with piggyback reservoir\u003c\/li\u003e\n  \u003cli\u003e6061 aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003e100% Revalveable\u003c\/li\u003e\n  \u003cli\u003e100% Rebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade the suspension performance of your 2014-2021 Toyota Tundra with the ICON 57823EP Vehicle Specific RXT rear shock pair. These 2.5 Aluminum Series shocks feature remote reservoirs and CDEV technology, providing vehicle-specific damping for controlled off-road performance and a smoother street ride. The RXT side-mount eyelet design delivers a shorter collapsed length and greater extension while fitting the factory mounting location, helping increase wheel travel when paired with ICON Multi-Rate Leaf Springs.\u003cbr\u003eThe ICON CDE Valve allows in-vehicle adjustment of compression damping and active control through the ICON Intelligent Control (IIC) system. An internal Bump Zone, created by ICON’s 6061 billet aluminum manifold, adds 20% damping force as the shock approaches full compression. This helps reduce harsh bottoming and improves suspension control during high-speed compression. Remote reservoirs improve heat dissipation, helping reduce shock fade during prolonged or demanding use.\u003cbr\u003eBuilt for durability, the ICON 57823EP shocks use one-piece hard-anodized, impact-extruded aluminum cylinders, CNC-machined 6061 aircraft-grade aluminum components, a 7\/8-inch induction-hardened chrome-plated shaft, PTFE-lined spherical bearings, and application-specific mounting hardware. Premium 5WT shock oil supports consistent damping across a wide temperature range, while the nitrogen-charged monotube design provides reliable performance. These shocks are fully rebuildable and revalveable for long-term serviceability. Installation also requires the ICON IIC kit, part number 53506, and CDEV front coilovers, part number 58750E.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCDEV technology enables in-vehicle compression damping adjustment and active control through the ICON Intelligent Control system\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle-specific valving and one-piece digressive piston design optimize ride quality and suspension control on and off the road\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Bump Zone increases damping force by 20% near full compression to help control harsh bottoming\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRXT side-mount eyelet design increases available wheel travel when used with ICON Multi-Rate Leaf Springs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir design improves heat dissipation and helps reduce shock fade during extended use\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHard-anodized, impact-extruded aluminum cylinders provide corrosion resistance and a consistent finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePremium 5WT shock oil maintains consistent damping across a wide temperature range\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e7\/8-inch induction-hardened, chrome-plated shock shaft provides durable operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNitrogen-charged monotube construction with piggyback-style remote reservoirs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePTFE-lined spherical bearings and application-specific mounting hardware included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e100% rebuildable and 100% revalveable design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for 2014-2021 Toyota Tundra applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation requires ICON IIC kit part number 53506 and CDEV front coilovers part number 58750E\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\nCompatible With\u003cbr\u003e\n2014 Toyota Tundra\u003cbr\u003e\n2015 Toyota Tundra\u003cbr\u003e\n2016 Toyota Tundra\u003cbr\u003e\n2017 Toyota Tundra\u003cbr\u003e\n2018 Toyota Tundra\u003cbr\u003e\n2019 Toyota Tundra\u003cbr\u003e\n2020 Toyota Tundra\u003cbr\u003e\n2021 Toyota Tundra","brand":"ICON","offers":[{"title":"Default Title","offer_id":50543843770608,"sku":"57823EP","price":2070.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/6242\/3792\/files\/115bcd00e6bd100fd487b215f4725a1c.jpg?v=1790467333","url":"https:\/\/overlandgear.co\/products\/icon-57823ep-rxt-rear-2-5-vs-remote-reservoir-cdev-shocks-for-2014-2021-toyota-tundra-pair","provider":"Overland Gear Co","version":"1.0","type":"link"}