{"product_id":"icon-57810cp-2-5-series-rear-shocks-with-cdc-valve-for-toyota-4runner-and-fj-cruiser-1-3-inch-lift","title":"ICON 57810CP 2.5 Series Rear Shocks with CDC Valve for Toyota 4Runner and FJ Cruiser, 1–3 Inch Lift","description":"ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDC Valve is an externally adjustable valve that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. If you are looking for a more user defined tune, consider looking into the Omega Series bypass shocks.\nICON VS 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. They feature remote reservoirs, damping adjustability, and are 100% rebuildable\/revalveable.\nTECH NOTE: Will not fit models with factory rear air suspension. Vehicles equipped with rear air suspension require rear coil conversion, ICON part number 56110, and rear coil springs, ICON part number 52700 or 52800.\n\u003cul\u003e\n  \u003cli\u003eOne piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road\u003c\/li\u003e\n  \u003cli\u003eICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression\u003c\/li\u003e\n  \u003cli\u003eICON's CDC Valve technology allows for 10 levels of high-resolution compression adjustability with the turn of a knob\u003c\/li\u003e\n  \u003cli\u003eOne-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish\u003c\/li\u003e\n  \u003cli\u003ePremium grade 5WT shock oil for consistent suspension damping along a wide temperature range\u003c\/li\u003e\n  \u003cli\u003eRemote reservoir design improves heat dissipation to reduce shock fade during prolonged use\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e7\/8” diameter induction hardened, chrome plated shock shaft\u003c\/li\u003e\n  \u003cli\u003eNitrogen charged monotube design with piggyback reservoir\u003c\/li\u003e\n  \u003cli\u003e6061 aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003e100% Revalveable\u003c\/li\u003e\n  \u003cli\u003e100% Rebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade your vehicle’s suspension performance with ICON Part Number 57810CP 2.5 Series rear shocks. Designed for select Toyota 4Runner and FJ Cruiser applications with a 1–3 inch lift, this pair of vehicle-specific shocks is tuned for improved control off-road while maintaining a smooth, comfortable ride on the street. ICON configures each shock’s length and damping specifically for the application, helping deliver predictable handling across varied terrain.\u003cbr\u003eThe nitrogen-charged monotube design features remote reservoirs to improve heat dissipation and help reduce shock fade during extended or demanding use. ICON’s externally adjustable CDC Valve provides 10 levels of compression damping adjustment, allowing drivers to fine-tune suspension response with the turn of a knob. A one-piece digressive piston and vehicle-specific valving provide responsive damping, while the internal Bump Zone increases damping force by 20% near full compression to help control high-speed suspension movement and reduce harsh bottoming.\u003cbr\u003eBuilt for long-term serviceability, these ICON shocks use corrosion-resistant impact-extruded aluminum cylinders, 6061 aircraft-grade aluminum components, premium 5WT shock oil, PTFE-lined spherical bearings, and a 7\/8-inch induction-hardened chrome-plated shaft. The shocks are 100% rebuildable and revalveable, making them suitable for drivers who want durable performance and future tuning flexibility. Application-specific mounting hardware is included.\u003cbr\u003eImportant fitment note: These shocks will not fit vehicles equipped with factory rear air suspension. Vehicles with rear air suspension require a rear coil conversion using ICON Part Number 56110, along with rear coil springs such as ICON Part Number 52700 or 52800. Verify vehicle configuration and lift height before installation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVehicle-specific valving and digressive piston design for controlled on-road and off-road performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eICON CDC Valve with 10 levels of externally adjustable compression damping\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Bump Zone increases damping force by 20% near full compression\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir design improves heat dissipation and helps reduce shock fade\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCorrosion-resistant one-piece aluminum cylinder with consistent finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNitrogen-charged monotube construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePremium 5WT shock oil supports consistent damping across a wide temperature range\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePTFE-lined spherical bearings and application-specific mounting hardware\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e7\/8-inch induction-hardened, chrome-plated shock shaft\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e6061 aircraft-grade aluminum CNC-machined components\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e100% rebuildable and 100% revalveable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for select Toyota 4Runner and FJ Cruiser applications with a 1–3 inch lift\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\nCompatible With\u003cbr\u003e\n2003 Lexus GX470\u003cbr\u003e\n2003 Toyota 4Runner\u003cbr\u003e\n2004 Lexus GX470\u003cbr\u003e\n2004 Toyota 4Runner\u003cbr\u003e\n2005 Lexus GX470\u003cbr\u003e\n2005 Toyota 4Runner\u003cbr\u003e\n2006 Lexus GX470\u003cbr\u003e\n2006 Toyota 4Runner\u003cbr\u003e\n2007 Lexus GX470\u003cbr\u003e\n2007 Toyota 4Runner\u003cbr\u003e\n2007 Toyota FJ Cruiser\u003cbr\u003e\n2008 Lexus GX470\u003cbr\u003e\n2008 Toyota 4Runner\u003cbr\u003e\n2008 Toyota FJ Cruiser\u003cbr\u003e\n2009 Lexus GX470\u003cbr\u003e\n2009 Toyota 4Runner\u003cbr\u003e\n2009 Toyota FJ Cruiser\u003cbr\u003e\n2010 Lexus GX460\u003cbr\u003e\n2010 Toyota 4Runner\u003cbr\u003e\n2010 Toyota FJ Cruiser\u003cbr\u003e\n2011 Lexus GX460\u003cbr\u003e\n2011 Toyota 4Runner\u003cbr\u003e\n2011 Toyota FJ Cruiser\u003cbr\u003e\n2012 Lexus GX460\u003cbr\u003e\n2012 Toyota 4Runner\u003cbr\u003e\n2012 Toyota FJ Cruiser\u003cbr\u003e\n2013 Lexus GX460\u003cbr\u003e\n2013 Toyota 4Runner\u003cbr\u003e\n2013 Toyota FJ Cruiser\u003cbr\u003e\n2014 Lexus GX460\u003cbr\u003e\n2014 Toyota 4Runner\u003cbr\u003e\n2014 Toyota FJ Cruiser\u003cbr\u003e\n2015 Lexus GX460\u003cbr\u003e\n2015 Toyota 4Runner\u003cbr\u003e\n2016 Lexus GX460\u003cbr\u003e\n2016 Toyota 4Runner\u003cbr\u003e\n2017 Lexus GX460\u003cbr\u003e\n2017 Toyota 4Runner\u003cbr\u003e\n2018 Lexus GX460\u003cbr\u003e\n2018 Toyota 4Runner\u003cbr\u003e\n2019 Lexus GX460\u003cbr\u003e\n2019 Toyota 4Runner\u003cbr\u003e\n2020 Lexus GX460\u003cbr\u003e\n2020 Toyota 4Runner\u003cbr\u003e\n2021 Lexus GX460\u003cbr\u003e\n2021 Toyota 4Runner\u003cbr\u003e\n2022 Lexus GX460\u003cbr\u003e\n2022 Toyota 4Runner\u003cbr\u003e\n2023 Lexus GX460\u003cbr\u003e\n2023 Toyota 4Runner\u003cbr\u003e\n2024 Toyota 4Runner","brand":"ICON","offers":[{"title":"Default Title","offer_id":50543702343920,"sku":"57810CP","price":1553.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/6242\/3792\/files\/cdd49b74b956e333759ea2e439279c36.jpg?v=1790464364","url":"https:\/\/overlandgear.co\/products\/icon-57810cp-2-5-series-rear-shocks-with-cdc-valve-for-toyota-4runner-and-fj-cruiser-1-3-inch-lift","provider":"Overland Gear Co","version":"1.0","type":"link"}