{"product_id":"icon-57805xp-2-5-aluminum-series-rear-remote-reservoir-shocks-with-cdxs-for-2010-2014-toyota-tacoma","title":"ICON 57805XP 2.5 Aluminum Series Rear Remote Reservoir Shocks with CDXS for 2010–2014 Toyota Tacoma","description":"ICON’s 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Featuring one-piece impact extruded aluminum cylinders, these 2.5 Aluminum Series shocks offer lighter weight, improved corrosion resistance, and a more uniform finish than traditional plated steel cylinders. Like all ICON'S Shock Absorbers, 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. ICON's exclusive Compression Damping Dual Speed (CDXS) valves are included for precisely dialing in your suspension performance. CDXS controls fluid flow under compression, with independent adjustability of high speed and low speed compression force. 10 discreet detented settings for both low and high-speed adjustment knobs allow separate adjustments for handling response and overall aggressiveness.\nICON 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune.\nAPPLICATION NOTE #185 : Will not fit 2WD Tacoma with 5 wheel lug studs\n\u003cul\u003e\n  \u003cli\u003eICON CDXS equipped for independent adjustability of high speed and low speed compression force for handling response and aggressiveness\u003c\/li\u003e\n  \u003cli\u003eOne piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road\u003c\/li\u003e\n  \u003cli\u003eICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression\u003c\/li\u003e\n  \u003cli\u003eOne-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish\u003c\/li\u003e\n  \u003cli\u003eRemote reservoir design improves heat dissipation to reduce shock fade during prolonged use\u003c\/li\u003e\n  \u003cli\u003ePremium grade shock oil for consistent suspension damping along a wide temperature range\u003c\/li\u003e\n  \u003cli\u003ePTFE lined spherical bearings and application specific mounting hardware\u003c\/li\u003e\n  \u003cli\u003e7\/8” diameter induction hardened, chrome plated shock shaft\u003c\/li\u003e\n  \u003cli\u003eNitrogen charged monotube design with remote reservoir\u003c\/li\u003e\n  \u003cli\u003e6061 aircraft grade aluminum CNC machined components\u003c\/li\u003e\n  \u003cli\u003eDouble-sealed Schrader caps reduce risk of damage\u003c\/li\u003e\n  \u003cli\u003e100% Rebuildable and revalveable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade the rear suspension of your 2010–2014 Toyota Tacoma with the ICON 2.5 Aluminum Series Shock Absorber Pair, Part Number 57805XP. Designed for trucks with up to 1.5 inches of lift, these application-specific shocks combine a vehicle-specific damping tune with a one-piece digressive piston for controlled handling, improved ride quality, and reliable performance on and off the road. Application Note #185: These shocks will not fit 2WD Toyota Tacoma models with five wheel lug studs.\u003cbr\u003eICON 57805XP shocks feature remote reservoirs that improve heat dissipation and help reduce shock fade during prolonged off-road use. The integrated Compression Damping Dual Speed (CDXS) system provides 10 detented settings for independent high-speed and low-speed compression adjustment. This allows you to fine-tune handling response, suspension aggressiveness, and control according to driving conditions. ICON’s internal Bump Zone adds approximately 20% damping force near full compression to help control the suspension and reduce harsh bottoming.\u003cbr\u003eBuilt for long-term service, the 2.5 Aluminum Series uses lightweight, impact-extruded aluminum cylinders for improved corrosion resistance and a consistent finish. Each shock includes a 7\/8-inch induction-hardened, chrome-plated shaft, premium-grade shock oil, PTFE-lined spherical bearings, application-specific mounting hardware, and 6061 aircraft-grade aluminum CNC-machined components. Double-sealed Schrader caps help protect the charging ports, while the nitrogen-charged monotube design provides consistent damping across a wide range of temperatures. Like other ICON shock absorbers, the 57805XP is fully rebuildable and revalveable for future servicing and performance customization.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFits 2010–2014 Toyota Tacoma models with up to 1.5 inches of lift; does not fit 2WD models with five wheel lug studs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCDXS-equipped design provides independent high-speed and low-speed compression adjustment with 10 detented settings\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemote reservoir improves heat dissipation and helps reduce shock fade during extended use\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal Bump Zone increases damping by approximately 20% near full compression for improved bottom-out control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOne-piece digressive piston with application-specific valving delivers controlled on-road and off-road performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eImpact-extruded aluminum cylinder provides reduced weight, corrosion resistance, and a consistent finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNitrogen-charged monotube construction supports consistent damping across a wide temperature range\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e7\/8-inch induction-hardened, chrome-plated shock shaft resists wear and corrosion\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePremium-grade shock oil maintains consistent suspension performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePTFE-lined spherical bearings and application-specific mounting hardware included\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e6061 aircraft-grade aluminum CNC-machined components provide strength and durability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDouble-sealed Schrader caps help protect charging ports from damage\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFully rebuildable and revalveable for long-term serviceability\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\nCompatible With\u003cbr\u003e\n2005 Toyota Tacoma\u003cbr\u003e\n2006 Toyota Tacoma\u003cbr\u003e\n2007 Toyota Tacoma\u003cbr\u003e\n2008 Toyota Tacoma\u003cbr\u003e\n2009 Toyota Tacoma\u003cbr\u003e\n2010 Toyota Tacoma\u003cbr\u003e\n2011 Toyota Tacoma\u003cbr\u003e\n2012 Toyota Tacoma\u003cbr\u003e\n2013 Toyota Tacoma\u003cbr\u003e\n2014 Toyota Tacoma\u003cbr\u003e\n2015 Toyota Tacoma\u003cbr\u003e\n2016 Toyota Tacoma\u003cbr\u003e\n2017 Toyota Tacoma\u003cbr\u003e\n2018 Toyota Tacoma\u003cbr\u003e\n2019 Toyota Tacoma\u003cbr\u003e\n2020 Toyota Tacoma\u003cbr\u003e\n2021 Toyota Tacoma\u003cbr\u003e\n2022 Toyota Tacoma\u003cbr\u003e\n2023 Toyota Tacoma","brand":"ICON","offers":[{"title":"Default Title","offer_id":50543846293744,"sku":"57805XP","price":1659.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/6242\/3792\/files\/75eaa19b8e3d027899562d51d40949dbL.jpg?v=1790467383","url":"https:\/\/overlandgear.co\/products\/icon-57805xp-2-5-aluminum-series-rear-remote-reservoir-shocks-with-cdxs-for-2010-2014-toyota-tacoma","provider":"Overland Gear Co","version":"1.0","type":"link"}