{"product_id":"icon-54300-lower-control-arm-kit-for-2005-2023-toyota-tacoma","title":"ICON 54300 Lower Control Arm Kit for 2005-2023 Toyota Tacoma","description":"The ICON Vehicle Dynamics 2005-2023 Toyota Tacoma Lower Control Arm Kit is designed to be the ultimate stock width replacement control arm upgrade. Their fully welded, boxed, CNC laser cut and brake formed steel plate construction is internally braced with multiple ribs to offer significantly improved strength over the stock Tacoma LCAs. Featuring a high ground clearance design, specially angled plates also allow the arms to easily slide over larger obstacles out on the trail. CNC machined forged steel ball joint housings maintain the highest possible ground clearance while also ensuring strength and appropriate CV boot clearance on 4WD Tacoma models. Rather than using traditional top mounted coilover mounting tabs, these LCAs utilize recessed coilover mounts, further increasing strength and provide race inspired styling. Their incorporated secondary shock mounting tabs tie seamlessly into the ICON S2 Secondary Shock System for a fully bolt-on installation of multiple secondary shock options to effectively double the shock damping ability of the front suspension and improve off-road performance. To make these arms as much at home on the street as they are on the trail, the lower ball joints are of a metal on metal and greaseable design to avoid the short service life and noises typically associated with uniballs while also being able to withstand the abuses of aggressive off-road use. The inner pivot bushings are bonded polyurethane to the outer sleeve and unbonded inner sleeve to minimize deflection and improve handling characteristics while allowing unhindered suspension movement though the entire travel range. Additionally, these specialty bushings do not require any greasing or other maintenance throughout their service life. With features like these, the ICON 2005-2023 Toyota Tacoma Lower Control Arm Kit would make an incredible addition to round out your Tacoma’s suspension system.\nThe ICON 05-23 Toyota Tacoma Lower Control Arm Kit is designed to be the ultimate stock width replacement control arm upgrade. Featuring a fabricated, boxed, steel plate construction, a clearance design, and secondary shock compatibility.\nRecommended Aftermarket Tires: 33\" x 11.50\" (Larger tires may fit but fender trimming and modifications will be required.)\n\u003cul\u003e\n  \u003cli\u003eAngled front plates and relocated steering stops help arms slide over obstacles and prevent trail hang ups\u003c\/li\u003e\n  \u003cli\u003eMetal on metal, greaseable lower ball joints for longevity and noise free operation\u003c\/li\u003e\n  \u003cli\u003ePocketed lower plates allow drainage and easy access to coilover mounting hardware\u003c\/li\u003e\n  \u003cli\u003eICON secondary shock compatibility with ICON S2 Shock Hoops (sold separately)\u003c\/li\u003e\n  \u003cli\u003eFully welded boxed steel construction with internal ribs for maximum strength\u003c\/li\u003e\n  \u003cli\u003eCNC machined forged ball joint housings ensure strength and CV boot clearance\u003c\/li\u003e\n  \u003cli\u003eFabricated components covered by ICON’s Limited Lifetime Warranty\u003c\/li\u003e\n  \u003cli\u003eSemi-gloss black powder coat finish for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eMaintenance free bonded polyurethane bushings\u003c\/li\u003e\n  \u003cli\u003eCNC laser cut and brake formed steel plate\u003c\/li\u003e\n  \u003cli\u003eHigh clearance, stock width design\u003c\/li\u003e\n  \u003cli\u003eRecessed coilover mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade your 2005-2023 Toyota Tacoma with the ICON 54300 Lower Control Arm Kit, a stock-width replacement designed to improve strength, ground clearance, handling, and off-road capability. Each control arm uses fully welded, boxed steel plate construction with CNC laser-cut and brake-formed components, reinforced internally with multiple ribs for greater durability than the factory arms. Angled front plates and relocated steering stops help the arms slide over trail obstacles while reducing the chance of hang-ups.\u003cbr\u003eThe high-clearance design includes CNC-machined forged steel ball joint housings that maintain clearance beneath the vehicle while providing strength and appropriate CV boot clearance on 4WD Tacoma models. Recessed coilover mounts improve structural rigidity and provide a clean, race-inspired appearance, while pocketed lower plates allow drainage and convenient access to coilover mounting hardware. Integrated secondary shock mounting tabs are compatible with ICON S2 Shock Hoops, enabling a fully bolt-on secondary shock setup to increase front suspension damping and enhance off-road performance.\u003cbr\u003eFor dependable street and trail use, the ICON 54300 kit features metal-on-metal, greaseable lower ball joints engineered for long service life and quiet operation. Bonded polyurethane inner pivot bushings minimize deflection, improve handling, and allow unrestricted suspension movement without requiring lubrication or routine maintenance. A semi-gloss black powder coat helps resist corrosion, and fabricated components are covered by ICON’s Limited Lifetime Warranty. Recommended aftermarket tire size is 33 inches by 11.50 inches; larger tires may require fender trimming or additional modifications. ICON S2 Shock Hoops are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHigh-clearance, stock-width control arm design for 2005-2023 Toyota Tacoma\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFully welded, boxed steel construction with internal reinforcing ribs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCNC laser-cut and brake-formed steel plate components\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAngled front plates and relocated steering stops help prevent trail hang-ups\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMetal-on-metal, greaseable lower ball joints for durable, quiet operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCNC-machined forged steel ball joint housings improve strength and CV boot clearance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRecessed coilover mounting points increase strength and provide a clean appearance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePocketed lower plates provide drainage and access to coilover mounting hardware\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIntegrated secondary shock mounts compatible with ICON S2 Shock Hoops\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaintenance-free bonded polyurethane inner pivot bushings\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSemi-gloss black powder coat finish helps resist corrosion\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFabricated components backed by ICON’s Limited Lifetime Warranty\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRecommended aftermarket tires: 33 inches by 11.50 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\nCompatible With\u003cbr\u003e\n2005 Toyota Tacoma\u003cbr\u003e\n2006 Toyota Tacoma\u003cbr\u003e\n2007 Toyota Tacoma\u003cbr\u003e\n2008 Toyota Tacoma\u003cbr\u003e\n2009 Toyota Tacoma\u003cbr\u003e\n2010 Toyota Tacoma\u003cbr\u003e\n2011 Toyota Tacoma\u003cbr\u003e\n2012 Toyota Tacoma\u003cbr\u003e\n2013 Toyota Tacoma\u003cbr\u003e\n2014 Toyota Tacoma\u003cbr\u003e\n2015 Toyota Tacoma\u003cbr\u003e\n2016 Toyota Tacoma\u003cbr\u003e\n2017 Toyota Tacoma\u003cbr\u003e\n2018 Toyota Tacoma\u003cbr\u003e\n2019 Toyota Tacoma\u003cbr\u003e\n2020 Toyota Tacoma\u003cbr\u003e\n2021 Toyota Tacoma\u003cbr\u003e\n2022 Toyota Tacoma\u003cbr\u003e\n2023 Toyota Tacoma","brand":"ICON","offers":[{"title":"Default Title","offer_id":50543812280560,"sku":"54300","price":1961.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/6242\/3792\/files\/76bda3d251997ce5d30b0f8ec2d6da5fL.jpg?v=1790466638","url":"https:\/\/overlandgear.co\/products\/icon-54300-lower-control-arm-kit-for-2005-2023-toyota-tacoma","provider":"Overland Gear Co","version":"1.0","type":"link"}