{"product_id":"icon-22043-centerline-steering-stabilizer-kit-for-2018-2023-jeep-wrangler-jl-and-2020-2023-jeep-gladiator-jt","title":"ICON 22043 Centerline Steering Stabilizer Kit for 2018-2023 Jeep Wrangler JL and 2020-2023 Jeep Gladiator JT","description":"Engineered to provide consistent steering damping with a through-shaft design, the new ICON Centerline Steering Stabilizer features an adjustable “Drive Zone” that can be custom-tailored to an individual’s desired steering feel. Developed with a wide range of aftermarket JL\/JT components in mind, this stabilizer is a high clearance design with a rotatable reservoir that allows for fitment on all ICON lift systems as well as most other lifts on the market. In addition to providing steering damping without the push or pull associated with a traditional stabilizer, the ICON Centerline Stabilizer features an adjustable “Drive Zone” with 9 levels of damping that affects 110 degrees of steering wheel input to the left or right of center. This allows the end user to customize how tight or how loose their vehicle handles in the middle of the steering range.\nThis stabilizer provides consistent steering damping with a through-shaft design, eliminating the common push\/pull sensation associated with traditional stabilizers. Its high-clearance design allows for fitment on ICON suspension lift kits.\nTECH NOTE: Requires a minimum of 1\" tall bump stop spacer (ICON part number 22044 recomended) unless suspension system already includes 1\" or taller front bump stop spacers\n\u003cul\u003e\n  \u003cli\u003e6063 clear anodized aluminum shock body provides excellent corrosion resistance and superb heat dissipation\u003c\/li\u003e\n  \u003cli\u003eThrough shaft design eliminates push\/pull sensation associated with traditional stabilizers\u003c\/li\u003e\n  \u003cli\u003eHigh clearance design and rotatable reservoir for proper fitment on all lift heights\u003c\/li\u003e\n  \u003cli\u003e5WT shock oil for consistent suspension damping along a wide temperature range\u003c\/li\u003e\n  \u003cli\u003eAdjustable “Drive Zone” with 9 clicks of damping adjustment\u003c\/li\u003e\n  \u003cli\u003eOptional clamps for aftermarket heavy duty tie rods (1-5\/8”)\u003c\/li\u003e\n  \u003cli\u003eProvides symmetrical steering feel throughout input range\u003c\/li\u003e\n  \u003cli\u003eFully serviceable ICON 2.0 Aluminum Series shock\u003c\/li\u003e\n  \u003cli\u003eIncreased steering damping over stock unit\u003c\/li\u003e\n  \u003cli\u003e5\/8” chrome plated hardened steel shaft\u003c\/li\u003e\n  \u003cli\u003eFK Rod End bearings for precise function\u003c\/li\u003e\n  \u003cli\u003e100% bolt-on installation\u003c\/li\u003e\n  \u003cli\u003eMounts to OE tie rod\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe ICON 22043 Centerline Steering Stabilizer Kit is engineered for consistent, controlled steering damping on 2018-2023 Jeep Wrangler JL and 2020-2023 Jeep Gladiator JT models. Its through-shaft design delivers symmetrical damping throughout the steering range while eliminating the push or pull sensation commonly associated with traditional steering stabilizers. The adjustable Drive Zone provides nine damping settings across approximately 110 degrees of steering input to either side of center, allowing you to tailor steering feel from tighter and more controlled to lighter and more responsive.\u003cbr\u003eDesigned for lifted Jeep applications, this ICON stabilizer features a high-clearance body and rotatable reservoir to support fitment across ICON suspension systems and many other aftermarket lift configurations. The 6063 clear-anodized aluminum shock body resists corrosion and efficiently dissipates heat, while 5WT shock oil helps provide consistent damping across a broad range of operating temperatures. Increased damping over the factory unit helps improve steering control without compromising the vehicle’s balanced steering response.\u003cbr\u003eThe ICON 22043 is a fully serviceable 2.0 Aluminum Series shock with a 5\/8-inch chrome-plated hardened steel shaft and FK rod-end bearings for precise operation. It mounts to the original-equipment tie rod and installs with a 100% bolt-on design. Optional clamps are available for aftermarket heavy-duty tie rods measuring 1-5\/8 inches. A minimum 1-inch-tall front bump-stop spacer is required unless the suspension system already includes spacers of that height or greater; ICON recommends part number 22044. Professional installation and verification of steering and suspension clearance are recommended.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Fits 2018-2023 Jeep Wrangler JL and 2020-2023 Jeep Gladiator JT\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSteering damping: Through-shaft design eliminates the push\/pull sensation of traditional stabilizers\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDrive Zone adjustment: Nine damping settings customize steering feel around center\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eClearance: High-clearance design and rotatable reservoir support fitment on multiple lift heights\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShock body: 6063 clear-anodized aluminum provides corrosion resistance and heat dissipation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDamping fluid: 5WT shock oil maintains consistent performance across a wide temperature range\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Fully serviceable ICON 2.0 Aluminum Series shock\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShaft: 5\/8-inch chrome-plated hardened steel shaft\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRod ends: FK rod-end bearings support precise operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: 100% bolt-on installation mounting to the original-equipment tie rod\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHeavy-duty tie rods: Optional clamps support aftermarket 1-5\/8-inch tie rods\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eClearance requirement: Requires a minimum 1-inch front bump-stop spacer unless already included with the suspension system\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\nCompatible With\u003cbr\u003e\n2018 Jeep Wrangler\u003cbr\u003e\n2019 Jeep Wrangler\u003cbr\u003e\n2020 Jeep Gladiator\u003cbr\u003e\n2020 Jeep Wrangler\u003cbr\u003e\n2021 Jeep Gladiator\u003cbr\u003e\n2021 Jeep Wrangler\u003cbr\u003e\n2022 Jeep Gladiator\u003cbr\u003e\n2022 Jeep Wrangler\u003cbr\u003e\n2023 Jeep Gladiator\u003cbr\u003e\n2023 Jeep Wrangler","brand":"ICON","offers":[{"title":"Default Title","offer_id":50543891349744,"sku":"22043","price":614.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/6242\/3792\/files\/d8fd28f7d6853a011a526660266e2d0fL.jpg?v=1790468328","url":"https:\/\/overlandgear.co\/products\/icon-22043-centerline-steering-stabilizer-kit-for-2018-2023-jeep-wrangler-jl-and-2020-2023-jeep-gladiator-jt","provider":"Overland Gear Co","version":"1.0","type":"link"}