{"product_id":"camburg-toyota-tacoma-2005-2023-long-travel-spring-under-mounts-shackles-and-hardware-kit-cam-320046","title":"Camburg Toyota Tacoma 2005-2023 Long-Travel Spring-Under Mounts, Shackles and Hardware Kit CAM-320046","description":"When we designed our spring-under kit for the 2005-2023 Toyota Tacoma’s we wanted to take the guess work out and make a kit that’s easier to install. We did this by designing the front and rear spring hangers to bolt to the frame using the existing holes used by the factory mounts that are riveted on. Our mounts are considerably stronger than weld-on versions and we incorporated tabbing on the rear mounts for a x-member or fuel cell cradle for even more strength. This race and BITD 7100 class championship winning kit has been used over the years on serious prerunners and race trucks in the deserts of California and as far as the Dakar rally. A limited travel variation of this kit was also used on the 2017 Tacoma we raced in the 2017 Mint 400 in the 7300 class. This suspension kit is for the serious builder\/enthusiast  and is intended to be used with a bed cage and 2.5-3.0 x 16-18? travel shocks through the bed along with FOX or King bump stops. Their is quite a bit of work involved with installing these parts and is not an entry level install. Leaf springs are not included.\nCamburg Toyota Tacoma Pre\/4wd '05-23 Long Travel Spring-Under Kit (no leaf springs)\nLeaf springs are not included. Need further assistance? Call 1-714-848-8880.\n\u003cul\u003e\n  \u003cli\u003eChampionship winning performance\u003c\/li\u003e\n  \u003cli\u003eIncreases wheel travel\u003c\/li\u003e\n  \u003cli\u003eRace winning design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Camburg CAM-320046 Long-Travel Spring-Under Kit is designed for 2005-2023 Toyota Tacoma PreRunner and 4WD builds seeking increased rear suspension travel and race-proven performance. This complete mounting, shackle, and hardware solution is engineered for serious off-road enthusiasts, desert prerunners, and competition trucks. Leaf springs are not included, allowing builders to select spring rates and configurations suited to their specific vehicle and intended use.\u003cbr\u003eThe front and rear spring hangers bolt to the Tacoma frame using the existing factory mounting holes, helping eliminate the guesswork associated with fabricating and positioning weld-on mounts. The bolt-on design provides a strong foundation while simplifying alignment during installation. Rear mount tabbing is incorporated to support the addition of a crossmember or fuel cell cradle, helping create a more rigid and capable chassis structure for demanding applications.\u003cbr\u003eDeveloped from Camburg's race experience, this spring-under system has been used on serious prerunners and race trucks in desert competition, including championship-level BITD 7100 applications and Dakar Rally builds. The kit is intended for advanced installations using a bed cage, through-bed long-travel shocks, and compatible FOX or King bump stops. Significant vehicle preparation and fabrication may be required, so professional installation or advanced mechanical experience is recommended. This is not an entry-level suspension project. For application assistance, contact Camburg at 1-714-848-8880.\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cbr\u003e  \u003cli\u003eChampionship-winning performance for demanding off-road and desert applications\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eIncreases rear wheel travel when paired with the appropriate suspension components\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eRace-proven spring-under design for Toyota Tacoma prerunners and competition trucks\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eFront and rear hangers mount using existing factory frame holes\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eRear mount tabs support crossmember or fuel cell cradle fabrication\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eLeaf springs are not included\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eChampionship-winning performance for demanding off-road and desert applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncreases rear wheel travel with compatible suspension components\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRace-proven spring-under design for Toyota Tacoma prerunners and competition trucks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBolt-on front and rear hangers use existing factory frame mounting holes\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRear mount tabs support crossmember or fuel cell cradle fabrication\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for advanced installations with a bed cage, long-travel shocks, and bump stops\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLeaf springs are not included\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\nCompatible With\u003cbr\u003e\n2005 Toyota Tacoma\u003cbr\u003e\n2006 Toyota Tacoma\u003cbr\u003e\n2007 Toyota Tacoma\u003cbr\u003e\n2008 Toyota Tacoma\u003cbr\u003e\n2009 Toyota Tacoma\u003cbr\u003e\n2010 Toyota Tacoma\u003cbr\u003e\n2011 Toyota Tacoma\u003cbr\u003e\n2012 Toyota Tacoma\u003cbr\u003e\n2013 Toyota Tacoma\u003cbr\u003e\n2014 Toyota Tacoma\u003cbr\u003e\n2015 Toyota Tacoma\u003cbr\u003e\n2016 Toyota Tacoma\u003cbr\u003e\n2017 Toyota Tacoma\u003cbr\u003e\n2018 Toyota Tacoma\u003cbr\u003e\n2019 Toyota Tacoma\u003cbr\u003e\n2020 Toyota Tacoma\u003cbr\u003e\n2021 Toyota Tacoma\u003cbr\u003e\n2022 Toyota Tacoma\u003cbr\u003e\n2023 Toyota Tacoma","brand":"Camburg","offers":[{"title":"Default Title","offer_id":50434139226352,"sku":"CAM-320046","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/6242\/3792\/files\/66e3543053a066be0016c616718ce705L.jpg?v=1789145415","url":"https:\/\/overlandgear.co\/products\/camburg-toyota-tacoma-2005-2023-long-travel-spring-under-mounts-shackles-and-hardware-kit-cam-320046","provider":"Overland Gear Co","version":"1.0","type":"link"}