{"product_id":"bilstein-53-350527-b8-5100-2-5-inch-lift-kit-for-2024-jeep-wrangler-with-front-heavy-load","title":"Bilstein 53-350527 B8 5100 2.5-Inch Lift Kit for 2024+ Jeep Wrangler with Front Heavy Load","description":"Bilstein B8 5100 Lift Kit is a high performance lift kit which provides more ground clearance, allows for larger tires, and increases wheel travel \u0026amp; articulation on all four corners of a solid axle Jeep Wrangler JL. The Bilstein B8 5100 Lift Kit consists of (4) B8 5100 shock absorbers combined with (4) custom matched, longer travel, cold wound coil springs and all necessary supporting components and hardware. This simple yet effective kit will bolt into the factory locations and allows Wrangler JL Rubicons to run 35\" tires and non-Rubicon models with stock fenders to run 33\" tires.  This kit optimizes the JL suspension, as delivered from the factory, and does not require additional components to correct suspension geometry which other lift kits often require. The Bilstein B8 5100 Lift Kit provides the full benefit of taller tires without an unsightly excessive wheel gap and provides a smooth and stable ride both on and off-road.\nComplete Suspension Lift Kit\n\u003cul\u003e\n  \u003cli\u003eB8 5100 Lift Kit consists of (4) B8 5100 shock absorbers combined with (4) custom matched, longer travel, cold wound coil springs and all necessary supporting components and hardware\u003c\/li\u003e\n  \u003cli\u003eB8 5100 Lift Kit provides the full benefit of taller tires without an unsightly excessive wheel gap and provides a smooth and stable ride both on and off-road\u003c\/li\u003e\n  \u003cli\u003eLift kit which provides more ground clearance, allows for larger tires, and increases wheel travel \u0026amp; articulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Bilstein B8 5100 Lift Kit, part number 53-350527, is a complete suspension upgrade for 2024 and newer Jeep Wrangler models equipped with a front heavy-load configuration. Designed to increase ground clearance, accommodate larger tires, and improve wheel travel and articulation, this kit enhances the Wrangler’s factory suspension without requiring additional components to correct suspension geometry. It is engineered for dependable performance on both the street and the trail while maintaining a smooth, stable ride.\u003c\/p\u003e\u003cp\u003eThe Bilstein B8 5100 system includes four B8 5100 shock absorbers, four custom-matched longer-travel cold-wound coil springs, and the supporting components and hardware required for installation. The shocks are tuned to work with the included springs, helping provide controlled suspension movement and consistent handling across varied terrain. The bolt-in design uses factory mounting locations for a straightforward installation and clean, integrated appearance.\u003c\/p\u003e\u003cp\u003eWith the added clearance from this lift kit, Wrangler JL Rubicon models can run tires up to 35 inches, while non-Rubicon models with stock fenders can run tires up to 33 inches, subject to wheel, tire, and vehicle-specific requirements. The Bilstein B8 5100 Lift Kit delivers the benefits of taller tires without excessive wheel gap, making it a practical choice for drivers seeking improved capability and balanced suspension performance. Always verify vehicle configuration and installation requirements before beginning work.\u003c\/p\u003e\u003cp\u003eComplete Suspension Lift Kit\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eB8 5100 Lift Kit consists of four B8 5100 shock absorbers, four custom-matched longer-travel cold-wound coil springs, and supporting components and hardware\u003c\/li\u003e\n\u003cli\u003eProvides additional ground clearance, larger-tire capability, and increased wheel travel and articulation\u003c\/li\u003e\n\u003cli\u003eDesigned to optimize the factory Wrangler JL suspension without requiring additional suspension-geometry correction components\u003c\/li\u003e\n\u003cli\u003eBolts into factory locations for a clean installation and integrated fit\u003c\/li\u003e\n\u003cli\u003eProvides a smooth and stable ride on and off the road\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eComplete suspension lift kit with four Bilstein B8 5100 shock absorbers and four custom-matched coil springs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for 2024 and newer Jeep Wrangler models with a front heavy-load configuration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncreases ground clearance, wheel travel, and suspension articulation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSupports larger tire fitment, including up to 35-inch tires on Wrangler JL Rubicon models and up to 33-inch tires on non-Rubicon models with stock fenders\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUses factory mounting locations and is designed to maintain proper suspension geometry without additional correction components\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\nCompatible With\u003cbr\u003e\n2024 Jeep Wrangler\u003cbr\u003e\n2025 Jeep Wrangler\u003cbr\u003e\n2026 Jeep Wrangler","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":50420063568112,"sku":"53-350527","price":1084.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/6242\/3792\/files\/81c3b38e62bb8815459793488ef9e63aL_368fe7ec-458d-41c6-8677-84666d2e0102.jpg?v=1789009410","url":"https:\/\/overlandgear.co\/products\/bilstein-53-350527-b8-5100-2-5-inch-lift-kit-for-2024-jeep-wrangler-with-front-heavy-load","provider":"Overland Gear Co","version":"1.0","type":"link"}